Jump to content
SAU Community

Recommended Posts

Hey guys, i got a black r33 series 2 and have been looking into giving the interior a bit of a make over..

i am looking at buying those leatherette seat covers, the same from the group buy.. with everything else, boot, door trims etc

just need an opinion of which colour would look good on my car... i was looking at getting it either in bone, similar to that red 32 that was on hot 4s, cream, red, or two tone red and black..

or if you have any other colour suggestions would be great.

il also most likely spray the dash in same colour, or chrome if i decide bone or cream

thanks

here is a link of of the actual seat covers... gives you an idea thanks Ebay Link

Edited by J3TR33
Link to comment
https://www.sau.com.au/forums/topic/232396-r33-interior-need-some-opinions/
Share on other sites

This again is one of those thing you really should just decide on your own cause others will only give you their opinion and everyone has one of those....

But, if you do just want another opinion that you may just disagree with, I'd stay right away from red & black it just looks tacky and cheap, I'm not a beige interior person, whenever I see beige or white interiors the next thing they get is 20"chromies, not a fan at all...

I'd go all black or black and dark grey, that way it suits the rest of the interior. I'm also not a fan of painted dashboards, everyone I've seen looks tacky and you know in a years time its gonna look worse from wear, reupholstered dashboards with a complete reupholstered interior would be ok but again I would go low key, black or dark grey, the outside of the car is for flamboyance, the inside is the machines interface for a driver...

But its just another persons opinion you have to like it yourself, screw what others think.

75coupe has a good point about individuality.

My next car (R33 GTSt) will have a red and black interior. I think it works really well, stands out, and isnt too hard to see or in your face. Bone and beige are too over the top, everyone has that. Its just too common, and not special any more.

One idea you should look at is a marble effect? I'm doing my dash like that soon, hopefully it turns out decent.

thanks for your replies people...

yeh i guess ultimately its up to me but sometimes excitement takes over the eyes and u end up with something that u later regret lol..

so lyk this i get a reality check

im thinking hard about this caus i also wanted to add rims to the car when i get these and want things to match.. no cromies lol

ok so considering ur opnions im down to these choices "white, two tone black and white or red" , although the more i look at the white the more i like it and the less i like the red. il be embroiding something like the nismo on the covers as well. maybe Skyline in black or Skyline with the GT logo.

Nissan_R33_GTST_4.jpgNissan_R33_GTST_1.jpgNissan_S15_7.jpgNissan_300ZX_Z32_2.jpgHonda_Accord_1.jpg

gearstickboothandbrakebrq3.jpg

and here are pics of the style of rims i was looking at getting

thanks again... ur opinions appreciated.. :sleep:

post-41800-1219593417_thumb.jpg

post-41800-1219593435_thumb.jpg

post-41800-1219593448_thumb.jpg

Edited by J3TR33

each to their own i guess...

i dnt c a point of getting black and grey... i guess i want it to stand out... which means getting both positive and negative feedbacks..

and jap rims arent cheap... oh and plus i got 4 stud so my options are quiet limited... i dnt think the hiro's on the pics come in 4 stud either... i jst like the style of them

Munkyboy: they are frm ebay, jst search leather seat covers... they are different from the group buy, the one in the pic you have to rip your old cover off.. they look sweet

Axis rims rims aint from Japan, they are USA made... and as far rims go personally I would not rate them highly at all... I find them a tad tacky like red and black or white fake leather interiors bought off ebay...

remember, you wanted opinions...

Axis rims rims aint from Japan, they are USA made... and as far rims go personally I would not rate them highly at all... I find them a tad tacky like red and black or white fake leather interiors bought off ebay...

remember, you wanted opinions...

lol i didnt say the axis rims were frm japan... i said japanese rims arent cheap, hence why im going for the cheaper options available to me in 4 stud.. if i had a GTR i would consider paying 3-4k on nice jap wheels, bt why bother if i have a gtst, the wheels will be worth half the price of the car.

its called leatherette haha, i guess ur offending everyother person that got these fake leather seat covers from the group buy :P

well thats what forums are for.. opinions, and no offence taken..

I think cream coloured with red or black stiching would look good.

You have 4 studs so i assume its a non tubo, my opinion dont waste money on an n/a

Axis hiros look nice i have a mate with a 180sx 2jzgte 750hp with em so dont listen to the get jap rims people. Unless your racing it and with a n/a that would be stupid

Decals/vinyl would be even more tacky

Edited by Pattygtst
I think cream coloured with red or black stiching would look good.

You have 4 studs so i assume its a non tubo, my opinion dont waste money on an n/a

Axis hiros look nice i have a mate with a 180sx 2jzgte 750hp with em so dont listen to the get jap rims people. Unless your racing it and with a n/a that would be stupid

Decals/vinyl would be even more tacky

its actually a DE+T :D, nah not racing with it anyway... i was going down the lines of white with black stitching...

yeh tru story about the vinyls... not a fan either

still looking for some nice rims lyk the axis hiros in 4 stud...

its actually a DE+T :O, nah not racing with it anyway... i was going down the lines of white with black stitching...

yeh tru story about the vinyls... not a fan either

still looking for some nice rims lyk the axis hiros in 4 stud...

Turbo well in that case

Yeah white with back sticthing would look nice.

You will find it real hard getting some 4 stud wheels i doubt the hiros come in 4 stud. Dont quote me on this but i think you can do a conversion to 5 stud wheels. Check out the n/a section or have a search for conversions

yep they are leatherette,

Go for it mate if you have the cash.

I wanted to do this on mine

How will you have it installed as you have to remove the current lining on the seats and chuck on the new ones. Sounds like a mum job

Post up pics when done of course... Hope it all goes well...

It should at least clean up the now aging seats in 32s & 33s.

you never know, you may convert me into liking leatherette and non standard interior colours.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...