Jump to content
SAU Community

Recommended Posts

  • Replies 105
  • Created
  • Last Reply

Top Posters In This Topic

EVOIV,

I can't remember exactly as it was 4 mnths back but from memory it was ~$120 for the widest option @ longest length. I think? I can't report on its success yet as it's still waiting for the new motor before I fit it. With the Microtech handset (intake temp reading) I'll be able assess "part" of its value fairly quickly though.

Guest INASNT
Originally posted by GTS-t VSPEC

Steve, It's all back from the ceramic coaters, putting it back together today, and retuned tommorow:D We're driving, but I'm not bringing my car. Either an R32 GTR or a Cefiro will be drifting:D

still waiting for u to email me those pics mate :D

INASNT, Hold your damn horses:p I've got the pics, will transfer them onto the computer tonight.

Steve, Just had my GT30 tuned, made 368rwhp at 13psi:D I'm very happy with the result, didn't want to push it any further on the stock internals.

Guest INASNT
Originally posted by GTS-t VSPEC

INASNT, Hold your damn horses:p I've got the pics, will transfer them onto the computer tonight.  

Steve, Just had my GT30 tuned, made 368rwhp at 13psi:D I'm very happy with the result, didn't want to push it any further on the stock internals.

wow, 270rwkw at 13psi?? damn!!

what size comp wheel and a/r u using??

Nice result Paul, have to post up a dyno sheet, and some photos of the install:D Dont worry about the internals, they are good for over 400rwhp with a good tune.

hehe, with that kind of power, i'm sure you'll definitely improve on the 13.5.  

No bloody way, he wont have any traction now;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...