Jump to content
SAU Community

Recommended Posts

Here's one for the die hard useless nissan info junkies out there.

OK so the other day I fitted a factory turbo system to my N/A and this morning I start the car up and I'm walking around the back and notice the exhaust gas is only coming out of the left pipe / tip. I put my hand near the right tip and there's nothing coming out. Anyway, I drive to work and park the car, I get out and put my hand behind each pipe and now the hot air's coming out of the right pipe now and there's little to no gas coming out of the left tip. :/

Is there some kind of thermo / bi-metallic flap in the factory muffler ?

Link to comment
https://www.sau.com.au/forums/topic/233248-factory-rear-mufflers/
Share on other sites

r34 stock turbo rear mufflers have a valve on right side which opens when more gas needs to pass.....never heard of it swapping sides thou.... should be coming out the left unless the valve opens up...... how is the turbo set up noise wise on the n/a??

i know with the 33 n/a's theres a factory valve that opens up but you would have noticed it when swapping it over. beats me...lol doesnt make any sense swapping tips.

Thats the one with 2 pipes going into the back of the muffler, yeah ? Mine's only got 1 pipe going in & no valve. It's got me fcuked ! Gonna push some broom sticks up there and see if anything moves.

r34 stock turbo rear mufflers have a valve on right side which opens when more gas needs to pass.....never heard of it swapping sides thou.... should be coming out the left unless the valve opens up...... how is the turbo set up noise wise on the n/a??

Cold at idle it growls. Cold on the road it sounds shit ( tinny ). Hot at idle it sounds OK and on the road hot it sounds kinda tinny but not too bad. I'm going to keep the system and just fit a better rear muffler ( big oval one ) and it should sound tasty.

how did i know your "money Saver" N/A wouldnt stay NA forever scott?

It's still N/A. It's just got a factory turbo cat-back exhaust system fitted to it now :P

This muffler thing has me baffled ! I had a look up the back and a poke around and there doesn't seem to be and valves or flaps or anything up there so I think I'm just going to have to chalk it up to one of those unsolved mysteries. :O

Just to prove I'm not crazy I'll take some vids and post em up when I get a chance.

rgr34, It's not actually noisy with the turbo system fitted but it does have that rattle sound as you put the boot in ( that all stock skyline systems have ). So yeah, I'll probably throw a big oval muffler on the back but not sure if I want an offset one since I don't want it too quiet :O

y dont u just gat a proper japanese cat back and muffler system happening dude???

Actually I already have a decent jap cat-back system but I was wondering how good a factory turbo system is / could be on an N/A so I fitted one. Just fcuking around doing some homework really, more for the sake of those who are looking for a cheaper option. The fact is though, there are VERY few jap cat-back systems available for R34 N/A 4 doors and almost all aftermarket jap "turbo" systems that will bolt up are too loud.

Anyway, the first post was the mainreason for posting. Still have no answer / idea.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...