Jump to content
SAU Community

Recommended Posts

I posted this in the general section but didn't get any replies... Maybe i'll have more success closer to home...

I'm after advice on getting this car registered legally in SA. The main problem is obviously the engine work... apart from that it's pretty normal.

Some of you may have seen this before:

http://members.fortunecity.com/boosted32/Mods1-5.htm

I know it will be defected the moment they look at the engine... but the question is... what can an engineer do for me?

Has anyone got something like this engineered and passed a roadworthy?

My circumstances have changed recently and I have to get it registered properly... if that means taking all the nice stuff off, I will do it as a last resort

Link to comment
https://www.sau.com.au/forums/topic/23329-getting-mods-engineered-any-advice/
Share on other sites

To engineer a car cost a few bucks. I was quoted $1770 IF nothing needs to be changed - ie passes emissions testing, brake testing, chassis rigitity and noise testing, plus all the mods are ok. I am still searching for somewhere that might be a bit cheaper, but other than getting the thing done in qld which it only cost a couple of hundred dollars, I am having trouble finding a cheaper option in this state.

If you are worried, as TIMMMAYYY suggests, drive it, then if you get defected, just stock it out. Probably cheaper.

thx for the good responses...

Steve, the engineering certificate for $1700 sounds quite good. I'd be willing to pay something like that if it meant I had a nice piece of paper saying everthing was legal.

Have u got more details on these guys, I would like to get in contact.

i will put it plainly.

Your are DREAMING

that doug potts guy is ****ing dodgy

I went through it all to get my car legal with big turbo etc but its all full of shit. Regency say that the emissions test that he does isnt even worth the paper it is printed on. seriostly.

the facts are (ring regency and ask them straight out)

FACT u can not run an aftermarket computer

u can not run an aftermarket turbo charger

u can not run anything other then say on IC which i have heard they pick on some times too.

I rang regency and they said the only emissions reports they accept are Mitsubishi (like 4K) and one in melbourne that is cheaper. Regency are looking at buying there own emissions testing equipment so it will be cheap as or free but they dont know when this will be happeneing.

I am getting mine done at Mits.

I think the usual price is about $2k

Regency BS about $3-5k but if you ask properly it's not that much....hopefully :)

Getting mine for a lot less than that

It's only a once off thing....please don't enquire :)

Originally posted by SR910

i will put it plainly.

Your are DREAMING

that doug potts guy is ****ing dodgy

I went through it all to get my car legal with big turbo etc but its all full of shit. Regency say that the emissions test that he does isnt even worth the paper it is printed on. seriostly.  

the facts are (ring regency and ask them straight out)

FACT u can not run an aftermarket computer

u can not run an aftermarket turbo charger

So did you actually get him to do the full engineer report? or did regency say he was no good? He did tell me that aftermarket computer may be a problem as regency believe that if you have one and change the mixtures after, causing damage to the car, that they would be liable - thats what Doug told me.

9krpn, no doug doesnt do the testing, its some company in adelaide, I am still chasing their details and will let you know as soon as I find out.

I've got the standard 32 computer still... so I'm ok there.

I thought the whole idea of an engineers report was that they could verify that mods are mechanically sound. Then the emission test will show that emissions are ok... if both are fine then everything is ok.

As long as your car is tuned properly and you don't have cams, etc and you have a good cat, you wouldn't have anything to worry about with an emission test, surely??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
    • Hey everyone! Im so grateful to be apart of this community and ill do my best to be apart of this. Firstly, i'm not disclosing my real name due to in real life circumstances surrounding my privacy and public image (sorry lol) Secondly, The only thing personal I am willing to share is that I'm from Sydney and a descendant of one of Sydneys largest mortgage firms. I got gifted my first ever car, a 2022 Porsche Cayenne and I love it to death. Ive been driving it for about 5 or 6 months now and honestly Im so grateful for my parents for gifting me this vehicle. However recently I've been working my ass off to afford my second car (which I need help deciding soooooo community help me out please?). Once decided, im planning to try modify it myself. Recent I've been thinking about getting a Skyline, particularly a 25GT or GT-V, yes I know overrated as hell, but I'm also considering a Chaser which I recently came to love. However my dream is to one day own a 180SX (So hard to find clean versions and im not really into importing).  Lastly before I send this off, I want to apologize if I sound tacky or pretentious. I try not to and want to genuinely learn from everyone and anyone. (Im no expert in this area) Thanks for reading!
    • I've got three stashed away but it's starting to get silly with the prices 
×
×
  • Create New...