Jump to content
SAU Community

Recommended Posts

Hey guys,

Just a simple little question... gotta HKS 25/40 being installed on my R33 and just contemplating the idea of the screamer pipe...

I had one a while back also on an R33 and sounded wicked under full throttle but really ghey at half throttle.. like an exhaust leak... Just wondering since a HKS 25-40 is obviously laggier than a stock r33 turbo will the crappy exhaust leak noise be minimised at half throttle as it wouldnt spool up as easy/earler as the HKS turbo..??

Thanks!

they sounds pretty lame on any internal gate turbo in my experience. and will always be leaking some gas as it's nigh on impossible to really seal one up as the turbo oulet flange is not designed for that.

Just so you realise the screamer will be VERY loud. I had one for a while but i got rid of it as it was just too loud for me and i love things ear piercingly loud. I once overtook a car with both windows down and the sound rebounding into the car was crazy loud.

You guys probably just havnt heard many screamers done PROPERLY on internal gate turbos.. mine sounded ***** wicked on my old 33 with a 3inch & no cats, 12psi, power fc etc. Only time it sounded ghey was at half thottle.. sounded like a bit of a tractor..

But im thinking with an aftermarket turbo like a HKS 2540 the gate doesnt open as early/easy as it does on a standard turbo so i shouldnt hear much of that tractor noise...

can anyone confirm this?

I think we have just heard to many bad examples of home made screamers on stock R33's etc running near stock boost on standard turbos..

We'll see how it sounds on mine running 16psi on the 2540, plus im now running GTR rods so ill be getting more RPM too :)

an extra 500rpm still makes me happy :)

oh well, we'll see how it sounds on mine. As long as i dont get the tractor noise at half throttle ill be happy, cos the rest sounds good.

Hmm... I'm a wierdo... my BOV is plummed back with a bigger pipe to make less sound... My 3" exhuast isnt the quietest but it sounds like a fart can on an excel when idling and mid revs is just a drone.... sounds fugn aces with WOT.... like an old 70's turbo F1 car only way not...

AND...

I f..g love it.

trust me... any extra noise you get in your car will only serve to shit you in the long term.... specially if you cruise any distance.... unless you can tune it out....

Oh yea... I don't get a second look from police unless their in the mood to make trouble for anyone in particular...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...