Jump to content
SAU Community

Recommended Posts

first i sanded the parts with wet and dry sand paper by hand. i used three different grades, i think they wher 800 through to 1200. them use a stitch cotton mop(buffing wheel) on a bench grinder,(has to be at least an 8inch) use the stitched mop with a brown buffing compound. then once you get a shinny finish u use a different buffing mop(loose leaf) with a white buffing compound. and u can get it a shinny as i did.

u also need a spindle (adaptor) for the buffing wheel to fit on a bench grinder.

guys remember this takes hours to get the result that i got.

8 hours to do the rocker(cam) covers.

6 hours to do the intake pipe.

1/2 hour to do the CAS

and about 9 hours to do the plenum.

and this is only polishing time. not removing or fitting parts back on.

r31 skyline chick

ur plenum looks really good, who did you get it done by?

i was thinking about going in to business for myself and doing polishing full time. what do you guys think.

how hard will it be to mainttain that shine ? coz im getting my intercooler piping re-done in stainless so looking to shine up the engine bay... im willing to spend time into it, i dont have a bench grinder, rekon there's any other way for me to do it ?

DJ_L3THAL

i wipe it over every time i wash the car and give it a light polish by hand about every 3-4 weeks and still looks as good as the day i did it.

deffinetly cant do it unless u have a good bench grinder!

you wont even be able to use a angle grinder because u need the loose leaf mop to get the best shine. you could always do it by hand, but you would have to do a lot more sanding, and it would take you an eturnity.

Originally posted by walkoau

r31 skyline chick

ur plenum looks really good, who did you get it done by?

My other half does all my polishing.

And my metal fabrication, and all the other fun stuff that I can't do by myself.

I do the painting and ricing and cleaning.

Originally posted by walkoau

i was thinking about going in to business for myself and doing polishing full time. what do you guys think.

I think it's fine.... as long as you don't mind getting dirty.

:)

It's probably not as viable as it sounds.

Some things can be an absolute bitch to polish, my plenum has at least 8 hours work in it, and it still isn't perfect.

You need to take into account that if something so small takes a whole day to do, will people be willing to pay you a whole days wages just for one little shiny bit?

:)

r31 Skyline chick

yeah iknow what ur saying, but i dont mind getting dirty, im a heavy vehicle/plant mechanic by trade so im always dirty anyway.

DJ_L3THAL

i have no idea how much a pro would charge to do it. id imagime it would cost a fortune, but they would have all the right gear and get it way better then mine.

also i personally dont like the blue on my hose and wiring! i want to purchase some blue silicon hoses to replace the black one and get rid of the blue plastic.

rb20-calais

pm me. let me know when you want it done. if you can remove and refit ur self?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...