Jump to content
SAU Community

Recommended Posts

hi ppl,

just a question about heat shield.

So here goes, when i am putting back the heat shield that is suppose to be on the manifold, it appears to be too near to the turbo. like 3-4 mm from the turbo to the heat shield or less.

is this too near or it wont be a problem long term?? if there are going to be problems, this is going to be a pain in the ass to take out the whole turbo again and re-allign it.... :)

here are some pictures.

thanks in advance.

post-40804-1220109292_thumb.jpg

post-40804-1220109305_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/234027-heat-shield-to-near-to-the-turbo/
Share on other sites

You might have issues with the silicone hose melting that close to it all.

I know i did, my setup was a bit different but principles of heat and so on are the same.

Ideally you'd wanna rotate the housing say 90 degree's to keep it away from the heat etc

hmm... too near....

according to the instruction manual, i am on the right track.

this is the picture of the instuction manual. the second picture.

if i rotate by 90degrees it will be hitting the side wall of the engine bay.

post-40804-1220162422_thumb.jpg

Edited by lcy
Looks like a HKS Pro S turbo .

I've never fitted one but is there any chance that the compressor cover (housing) needed to be rotated so it pointed a little further away from the exhaust manifold ?

Cheers A .

first of all i would like to add that this turbo is a kit from HKS itself. (right now i already know that it is not 100% bolt on) if i would have known better i would have paid some one to do it.

i have tried to move the compressor housing before putting it in. I have tried to move if further away from the heat shield but the more i move it away, the actuator will be touching the side wall of the engine bay. i brought the turbo to the turbo guru and he said allign it similar to the stock turbo. and everything looks fine before putting the heat shield on.

*is it possible that i finish it installing it and drive the car to the mechanic and let them refine the whole setup??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...