Jump to content
SAU Community

Recommended Posts

Item:R34 GTR Z-TUNE BONNET

Age:3 months

Condition:Perfect

Price:Open to a reasonable offer

To Fit: (What car)R34 GTR

Location:Hills Sydney

Contact:PM best

Comments:

Hey guys im selling my R34 GTR Z-Tune Style bonnet. This bonnet was purchased from Josh (JSAI) 3 months ago for $850.

The bonnet is in PERFECT condition. I really dont want to have to ship in interstate so hoping for a local buyer.

Any questions just PM me. The bonnet is on the car and i wont be taking if off unless i have a buyer.

Thanks

post-16690-1220258858_thumb.jpg

post-16690-1220258899_thumb.jpg

Edited by GTR32X
Link to comment
https://www.sau.com.au/forums/topic/234258-r34-gtr-z-tune-bonnet/
Share on other sites

Yes it is.

If it's not, then just as much money was spent making it look and drive like one :P

Its a nugget if you ask me ....doesnt pull for shit ..

nice bonnet you shouldnt be selling it if you ask me ...

Just in case no one noticed but this is not an actual

Z-Tune bonnet, it's an aftermarket copy. :P

Thanks for your input ... he mentioned in first post it was a Z Tune style bonnet , but not the real thing and if it was the real thing you think hed be selling it that much ? Original z tune bonnets go for alot more Theyd be be worth just as much as your S15 , get a real car ....

ah bullshit... pulls the chix better then your bucket :P

you both got nothin on mine though...

swapsies???

Least you drive a skyline ehehee ....

Anywayz is this bonnet sold my sister wants to put it on her Rav 4 ... would it fit ??

Just in case no one noticed but this is not an actual

Z-Tune bonnet, it's an aftermarket copy. :P

I think anyone buying would know that since i have said i bought if from Josh (JSAI) and i payed $850

But i guess u didnt read what i wrote.

Next time it may be wise to read everything before posting anything champ

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, yes, every CU on the bus is available via the Consult port, but whether the scanner you are using is capable of talking to the TCU, the ABS/TCS modules, etc etc, is what is at question here. Many of them are only for engine codes. So, if you have one of those, you won't know if the ABS is having a bitch.
    • That's now. R chassis Skylines come from a time when the tolerance in the ADRs was a bit more....slack. My car, on 235/35-17, which is damn near the exact same size as the original 205/55-16, is pretty much bang on correct indicated speed across the whole legal range. That's demonstrated with constant speed run over 5km, and GPS speed. It's just the luck of the draw. My particular speedo head has to be the thing that is "calibrated" that way, because everything else (the diff ratio, the gearbox and the speedo drive**) are all same same as most other Skylines. **OK, so the speedo drive is a Navara unit to drive the R32's cable, not the electronic unit than an R33/4 would normally have with teh same gear on it. Otherwise, I applaud your OCD tendencies, and I would do the same if I needed to.
    • Not too sure, I believe the Nissan consult port does everything? Also just filled up the reservoir to full and the light is still on. The float seems to move up and down fine.
    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph on 255/40 17, so again conservative Google says manufacturers need to set the speedo from 4 to 10% slower than actual road speed.....for safety.....and compliance  After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
×
×
  • Create New...