Jump to content
SAU Community

Recommended Posts

Hi,

I got a problem with my lights, when i turn on the low beams they work fine but when i then switch to high beam the low beams turn off and high beams come on. And this should not happen, both the low beam and the high beams should be on when u turn on highbeams? I only found this out when i went to get a pink slip and they wouldnt pass me cause of this....I tried to make it out that Japanese imports do this kind of stuff lol but that story didnt work...

Could this be a problem with the light switch?

Any help would be appreciated.

by the way the car is a R33 S2.

Link to comment
https://www.sau.com.au/forums/topic/234873-problem-with-lights/
Share on other sites

This is standard on ALL R33 Skylines - you only have two lights on at any time.

It is not a legal requirement that you have four lights on when high beam is on and if they try to tell you differently then go to another garage that knows their stuff.

Far out, i payed the guy $150 deposit to say that i would book a visit for him to fix it... thats the only way he would let me pass pink slip... How can I prove to him that ALL skylines do this, or some kind of regulation that says u dont need 4 lights on when high beaming.

Thanks for the replies fellas

Ah how bout the fact that people have melted the headlights from running highs and lows at the same time. Then NONE of the lights will work...

And 150 is crap. Do you get that money back if you take the car to him, cos 150 is way too much to wire ur headlights up like he has said. Takes all of 5 mins..

Ah how bout the fact that people have melted the headlights from running highs and lows at the same time. Then NONE of the lights will work...

And 150 is crap. Do you get that money back if you take the car to him, cos 150 is way too much to wire ur headlights up like he has said. Takes all of 5 mins..

I'll go back to him and ask for my money, but he seems to think that all cars need to have all 4 lights on when highbeaming, as in both lowbeam and highbeam on at the same time. On the pinkslip he failed me on rule 106.02 - "Headlight (high/low beam) now working or damaged"

Hmm. Im not sure exactly of that rule but i know for a fact that there are a lot of cars out there that do not and never have run low beams AND highbeams at the same time. Wats your mechanic like? I have met some who will fail you on anything they can just to make some more money out of you.

How can I prove to him that ALL skylines do this,

Pull the globe from the low-beam mounting, and show the twit that there is only ONE filament.

No car I am aware of, where the lamp has a twin filament, ever has the low-beam filament active once the switch activates hi-beam.

And if it is a problem, how on earth did the car pass compliance in the first place?

Anyone got the wiring diagram for a Skyline. I think any Skyline would do, because my 32 behaves like that - and I've NEVER had a problem with RWCs (pink slips).

No car I am aware of, where the lamp has a twin filament, ever has the low-beam filament active once the switch activates hi-beam.

I'm pretty sure i compared this with my friend's 200sx s14, and when he highbeamed both the highbeams and lowbeams were on, and that is a australian delivered car, i could be wrong though... Also good point if all skylines are like this how could they be complied... anyways does anyone have a wiring diagram for skylines??

Edited by da spike
Wats your mechanic like? I have met some who will fail you on anything they can just to make some more money out of you.

I dont usually go to this guy but it was a last minute pink slip as rego was expiring the next day, but hes very picky about everything, he also wanted to fail me on wiper blades rubbers being split but they werent actually.

This guy sounds like he has no idea.

Take it back and tell him to get his fax right!

I took it back and called the RTA to confirm that both low beams and high beams do not need to be on, the guy in the RTA didnt know much but said that its fine...

So i got my money back and my pink slip :)

Edited by da spike

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
    • I'm not 100% how the BMW racers do it, but I know from other brands like Merc, moving, and changing the coolers is one of the things. Like getting a transcooler out from infront of the radiator to out near a wheel arch. So some of the stuff you've got crammed in the middle front, spread it out and open up where you can in the bar to get more air in to the sides.
    • Small update for the day... Turns out the intercooler and engine coolant hose kits are anything but complete....I probably should have counted better but it only really covers about half the coolant hoses in the car, it really just covers the visible stuff and pretends everything else doesn't exist (turbo water feed and returns and also heat exchanger lines through the 2 pumps and cooler) .In any case, I'm happier to have half reliable hoses than none, but a bit of a disappointment. Anyway...finger click (and 5 hours).....hoses in place, lots of spring clamps replaced with screw clamps, and engine coolant is on the pressure tester for the night.   Incidentally, upsized header tank is an Inifiniti factory option....not sure I'll ever do prod car racing in this but at least it is legal.
    • Just weld it onto the hot pipe. If you want it right after the turbo, put it right after the turbo. Or rip the comp cover off and drill and tap a hole into it.
    • hahaha glad I can rely on you two to go on a spiral at the drop of a problem! Some quick answers....the ducting is excellent top bottom and sides....everything that gets in goes through the coolers (noting the oil cooler redirects it out again, fair call if it is cooling 120o+) and the heat exchanger for the intercooler also has some scoops to pick up more than it's fair share too. I can't see going down the water spray track....no bueno for formal racing and a big risk for long rally days if you run out (plus I'm not clear if it is allowed there either yet).   Frankly, it must be possible to reliably put 400kw through a standard front end, the BMWs do it so I just need to work it out....I'm starting with reducing blockages in the way and adding some coolant capacity with a bigger header tank, flushing rad and making sure it was filled/bled properly (I didn't do the last coolant change); also taken measurements incase next step is a bigger/higher capacity custom radiator
×
×
  • Create New...