Jump to content
SAU Community

R32 Parts Clearance - And S14 Non Hicas P/s Pump

KURAUN
 Share

Recommended Posts

KURAUN Grand Master

KURAUN

Posted
Posted

- R32 20mm wider front fiberglass guards one brand new, other has holes where was test fitted but not cut or anything - $150 ono

- Splitfire D1 ignition system ( its an earthing kit for coilpacks) cant use cause i want my coilpack cover on - $50

- r32 4 door taillights in gc - $80

- GAB shocks, rears damper adjustable and front shave lower springs

(not sure on condition of shocks, rear has a dent but was ok when on my car)

been off for a while now since i installed coilovers so condition may have changed - $100ono

- veilside rear bar for r32 gtst, brand new never fitted or used - $100ono

- front gtst cloth seats, need a vacuum and clean - $80ono

- r32 sedan bootlid and type m sedan spoiler, one tiny dent near boot lock - $80ono

- s14 non hicas powersteering pump and resivoir and bracket (decided to keep my hicas pump) - $100ono

may add few other things if i can find in next few days

have a few 32 sedan doors and door trims will have to pull them out

Parts are located in melb

pm or email me for any questions

Cheers Nick

KURAUN Grand Master

KURAUN

Posted
  • Author
Posted
f**k

Where were you a few weeks ago! :blush:

LOL yeh i saw that but didnt think i was gona be selling off this stuff

you can still buy them if it happens again :)

PM's replyed :)

Sexual_32 Proficient

Sexual_32

Posted
Posted
- Splitfire D1 ignition system ( its an earthing kit for coilpacks) cant use cause i want my coilpack cover on - $50

got a model number mate?

KURAUN Grand Master

KURAUN

Posted
  • Author
Posted
would the non hicas power steering pump work in a r32 gtst? pm'd about guards

Im not to sure if itll fit, you will have to find out

Could you please email a pic of the guards to [email protected]

Thanks!

Email sent :D

Cheers Nick

mystery_kid Mentor

mystery_kid

Posted
Posted

i don't suppose you know if the speaker grills in the front doors are the same as the 2 door ones?

if they are, would you be willing to post a pair of them to brissy?

KURAUN Grand Master

KURAUN

Posted
  • Author
Posted

sorry forgot to reply man been kinda busy

yeh they arnt in the best condition, both have fairly bad dents in them and i wouldnt recommend using them

  • 2 weeks later...
Hunting Lions Contributor

Hunting Lions

Posted
Posted
- R32 20mm wider front fiberglass guards one brand new, other has holes where was test fitted but not cut or anything - $150 ono

- Splitfire D1 ignition system ( its an earthing kit for coilpacks) cant use cause i want my coilpack cover on - $50

- r32 4 door taillights in gc - $80

- GAB shocks, rears damper adjustable and front shave lower springs

(not sure on condition of shocks, rear has a dent but was ok when on my car)

been off for a while now since i installed coilovers so condition may have changed - $100ono

- veilside rear bar for r32 gtst, brand new never fitted or used - $100ono

- front gtst cloth seats, need a vacuum and clean - $80ono

- r32 sedan bootlid and type m sedan spoiler, one tiny dent near boot lock - $80ono

- s14 non hicas powersteering pump and resivoir and bracket (decided to keep my hicas pump) - $100ono

may add few other things if i can find in next few days

have a few 32 sedan doors and door trims will have to pull them out

Parts are located in melb

pm or email me for any questions

Cheers Nick

let me guess u are not willing to sell the rubber seals in the doors? i m assuming its off a 4 door 32 expecting a no but i can only ask

pm reply

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • MBS206
      NC MX5

      By MBS206 · Posted

      At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • MBS206
      NC MX5

      By MBS206 · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Duncan
      NC MX5

      By Duncan · Posted

      Your chihuahuas look weird!
×
×
  • Create New...