Jump to content
SAU Community

Recommended Posts

Hey guys, i've just bought the car and was looking to take off the Nismo wing on my R34 and change it back to the standard GT-t one.

I just need to know if: The holes in the boot will match up fine?

Will there be any holes left in the rear quater panels from the side of the wings?

Thanking you in Advance

Link to comment
https://www.sau.com.au/forums/topic/235310-r34-nismo-wing-gt-t/
Share on other sites

I'm not sure about the "T" type wing matching up on the holes left from the Nismo type on the boot, coz mine didnt come with the nismo one...but i imagine that they wouldnt match up...

as for the rear quarters...prepare for a shock, coz once you remove that wing, it'll look like someone came past with a machine gun and sprayed bullets all over your rear quarter...it leaves like 4 or 5 holes, in various positions and sizes... :dry: good luck!

Hey mate, I had the nismo wing,

didn't realise when I bought my car at the time what a pain it would be to remove.

7 holes on the rear quarter on each side, so 14 holes in all

Yes, I too want to track down the previous owner in Japan and give them a proper smack on the mouth

I replaced mine with a GTR style wing, which is meant to match the boot holes on the normal gtt wing, so a normal wing will probably fit,

all I can say is good luck and start saving

If you want pics just click on the link in my sig :D

Edited by Yo-Yo
I know huh? Last time I try to help out! Sheesh!

Yo-Yo said that the wing he replaced was of an aftermarket one. He also made the assumption that the wing he bought was to fit the standard boot holes of a GT-t wing. His assumptions are correct and therefore i appreciated it. Your assumptions were made clear that they probably wouldn't fit (BUT.... sorry they DO)

I guess good help's HARD TO FIND... thanks again YO-YO

Hahaha alright MAN, I think you just need to RELAX coz I was only JOKING about what I SAID before about it being the LAST time that I try to HELP. About it being the SAME as what YO-YO had said, it was in REFERENCE TO the HOLES being left in the QUARTER PANELS. NOT about the WING, which I CLEARLY stated that I DIDN'T HAVE and that i'd IMAGINED that they probably WOULDN'T fit...not that it wouldn't fit ONE HUNDRED PERCENT.

*slips a valium*.. and itztru was correct in what he said.. it was similar to yo-yo.. there would be holes on the side panels.. hence why i stayed away from any with the nismo wing..

haha alright! free valium! 3 please! good thing I didnt end up with one with the nismo wing. i'd have completely freaked finding all those holes on both my rear quarters. imagine spending almost a grand to remove a wing and fix it up like howie had to...*tsk tsk* :(

why would nissan do such a thing? :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...