Jump to content
SAU Community

Recommended Posts

Hey guys, it's time for me to change my brakes..... I have in mind the EBC Green Stuff & Endless (Both are around $200-$250)

I was just wanting to know which ones were better? and if there were any other good options for this price?

Also, which brake fluid should i be using (or recommended), looking to run motul fluids?

And finally, i've been looking at buying some nismo braided lines for the brakes, but i'm unsure if these would dramatically reduce speed???

Thanks in Advance

Link to comment
https://www.sau.com.au/forums/topic/235470-r34-gt-t-brakes/
Share on other sites

Have you considered QFM brakes? I hear good things from them... made by the same guy who did bendix brakes... and at about $85 per pair :blink:

Also motul RBR600 (or something like that) will be good - it is dot 4.

And finally, nismo braided lines are not ADR approved, which means if you are buying these for a street car you can get defected for them and if you are involded in an accident your insurance may be voided. You can buy ADR approved braided lines for less than nismo items anyway... and all braided lines do is increase pedal feel, they do not directly make you car brake harder.

Edited by SLEEPR85
Link to comment
https://www.sau.com.au/forums/topic/235470-r34-gt-t-brakes/#findComment-4123148
Share on other sites

i have the QFM HPX pads, i havent put them in yet though :blink: lol

great price from gsl motorsports i think it was, look up jetpilot on the forums, he can sort you out

now i just gotta figure out how to install them... any tips/pics/threads on installing pads in a 34?

Link to comment
https://www.sau.com.au/forums/topic/235470-r34-gt-t-brakes/#findComment-4123241
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...