Jump to content
SAU Community

Recommended Posts

Hey all,

Ive been having some problems with my GTR and Ive tried everything on the forums relating to the problem and its still occuring. I cant trust the car enough to drive it down the road in fear of having to get it toed home.

The problem consists of mainly No power, Cutting out, Not starting after cutting out.

The car has been at my Auto Elec for the last week and he has tested my Ignition module and CAS, (bench tested) also done a fuel pressure test on my fuel pump. All came back peachy. I also got my AFMs reconditioned a week ago.

My Auto Elec basically said to me he needs the car in the shop when it is completely dead and wont start again. He told me its not worth buying parts that 'could' cause the problem, for the obvious reason being money. I cant wait for that though as i depend on a car to get to work etc.

If anyone has had this problem, something similar or even knows of some1 that has had this problem please throw me a bone. im at the end of my ropes..... if i cant fix it ill be buying a commodore :)..... maybe not lol

cheers joel.

Link to comment
https://www.sau.com.au/forums/topic/235811-calling-on-sau-for-advice/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

I had this problem with my 32 gtst, while driving it would cut in and out of boost, turn it self off. Had 3 different mechanics and auto elecs on it and still couldn't solve it. changed ecu, all sensors, fuel pump.

Then i took it for a drive with michael at turbo tune and he fiddled around with the tps sensor and it ended up being a faulty tps. We got one from jap land took ages put fixed the problem. I'd give that a go.

Im sure youve checked it but while its running, move all different parts of the loom, especially near teh cas, ignitor pack etc...a bit of vibration can pull wires in the wrong direction if they have a bad connection...so while its running move around the engine bay and lightly move the loom around...could find the problem.

Hi, had a similar problem when I bought my R32 GTR. Both AFMs and coils were causing the problem. Opened up each AFM and resoldered the 4 connections, then used silicone on each coil pack to make sure they weren't arcing. Oh yeah, get copper spark plugs and gap them to 0.8.

The AFMs were causing it to run like absolute crap with no power, cutting out, etc. The coils/plugs were just a slight misfire.

Cheers,

Matt

Where the TPS sensor is?

cheers matt for the thought, ive had both AFMs reconditioned and my Auto Elec checked the coil packs :)

im hoping its not a new ECU but if it is it will be a great weight off my mind lol

Yeh ive put a similar thread on the forums but not really getting many responses. although that was a while ago. i may repost with more details :)

Damo u just watch out for that old lady lol. got HC yet?

cheers richard :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...