Jump to content
SAU Community

Recommended Posts

Heya all,

Just thought i'd finally get off my bum and post some pics of my ride.

Plus i just bought a new digi camera ( Canon 10mp baby ! ) and just testing and playing around with it.

Had this car for around lil over 6 months now and bought it completely stock, Just tried to keep it sweet and simple. Steer away from the rice, and going with a JDM look ( low and tough ).

R33 95' GTS25t Type M

- Rb25det

- Apexi SAFC II ( tunes by DynoTunz )

- Apexi intake w/ home made heat shield

- Apexi N1 full zorst'

- HKS new design SSQV blow off valve

- Greddy front mount

- Turbosmart Tee @ 10psi

- Custom Catch Can

- JDM Concept Reservoir socks ( WOAH !! )

- Tein Coilovers ( on lowest setting )

- Cusco Strut brace

- Carbon Fibre gearknob / Autometer boost gauge / Apexi auto timer

- Rare Type M Grill ( well i dont see many around , ebay is the bomb ! )

- Potenza Re001 ( these are the shizzle ! )

- Top fuel sticker !!!! ( Adds 10kw @ the wheels for real ! ) :cool:

- Dancing Drift Monkey FTW !!! :down:

- Enkei RS evo II 16"( not on atm , no tread , Old school !!! )

Pics:

n52889572212727477015mg8.jpg

img0069rl8.jpg

img0071am9.jpg

img0070mi6.jpg

img0066iv1.jpg

img0097es3.jpg

img0102lc7.jpg

img0107yv8.jpg

img0106ge5.jpg

Youtube clips:

Just bought and install a new design HKS SSQV ( thanks to Steve ) ...

Just a quick strap, down a private road. No speeding on public roads people ! ( before HKS SSQV fitted )

Comments plezz...

Edited by lilhaulerz
Link to comment
https://www.sau.com.au/forums/topic/235987-sweet-and-simple-r33/
Share on other sites

Good to see you're enjoying the new BOV mate :happy:

Nice car too

Wingless for the win!

get one of the flush bootlids from carmate.

Shall be what im doing once i can afford to paint one in that ridiculous green colour

i got a set of ohlin coilovers for the new car. f**king fantastic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...