Jump to content
SAU Community

Recommended Posts

Keep us updated with your thoughts as they wear in.

I bought a set of brand new Bridgestone Adrenalin RE001s for my R33 GT-R in 255/45 ZR17. That's one at each corner on standard R33 GT-R wheels, with TEIN coilovers.

That was a good few months ago. These tyres replaced Dunlop Direzzas which were on the wheels prior (which were basically bald). Clearly I lost a fair bit of outright grip going to the Adrenalins and certainly a lot of steering response (with the Direzzas nearly bald, steering was on the verge of darty, particularly over bumps and ridges when the car would tramline terribly).

So at first the Adrenalins made me think they were a bit soft and squidgy, despite running around 37-38 psi cold pressure as I usually do. After a little bit of 'spirited driving' here and there I think they've worn in nicely now (either that or the psychological 'novelty' of the tyres has worn off and I've adapted my driving style) and they seem pretty well keyed into the road. In the wet they also seem competent. I have probably driven the car about 6-7 tenths since getting these tyres in the dry, and maybe only 3/10ths in the wet (haven't driven the car much lately) but in those conditions I'm quite happy with them.

I'll soon be getting some 18"x 10" GT-Cs delivered, which I'll need new rubber for, and I'd be happy to go Adrenalin's on those too, but I'll be reading up some more on these and other forums to see what alternatives out there.

Matt

I noticed you said 255/45ZR17. I tried to get these but they don't make them....well they weren't in the catalogue or listed on the website and the dealer said he couldn't get them either. I had to go 255/40ZR17.

I have Adrenalins on my car now.

255/40/17 rear

235/45/17 front

250rwkw, they are better in grip than the 3000A's i had when they were new (XR6 tyre, old gen). And i must admit the 3000A's were amazing considering in 16's they cost me $150ea new in what, '03 :D

The RE001's hold perfectly almost everytime in the dry with full throttle. Wet is surprisingly decent as well, can still get a fair amount of power down before its arguing. I haven't dont any big launches yet to see how they perform off the mark, however rolling starts from 20km/h and WOT are no problem.

Been on several hard twisty runs now also, although im not pushing them as hard as i could as my brakes aren't upto the task yet (warped rotors i need to fix)

So in saying that... They respond really well for a dedicated street tyre... cant ask for much more than that considering the price i paid.

FYI - im also running extra camber and nothing stock suspension wise and so on also which aids for the hill runs and i dont really notice much understeer. So overall very very happy

I'm happy to take your word for it ;)

Good to hear good experiences with these tyres :)

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

I noticed you said 255/45ZR17. I tried to get these but they don't make them....well they weren't in the catalogue or listed on the website and the dealer said he couldn't get them either. I had to go 255/40ZR17.

Good to hear good experiences with these tyres :laugh:

Sorry about that, they must be 40 aspect and not 45. I was also looking at the brochure yesterday and it didn't havt 45 listed. So mine would be exactly the same as yours then...

Might be a problem for me as the only ones in the dimensions close to what I want are 265/35 18 (for my new rims) which means the tyre sidewall will be 92.75mm. The standard tyre for the R33 GT-R on stock 17"s is 245/45 17, or 110.25mm sidewall height. Currently I'm at 255/40 17 or 102mm, so going for 265/35 is going to make the rolling diameter somewhat lower; nearly 20mm less which to me seems signficant. I suppose that as long as all four wheels are the same dimension for the ATTESA-ETS she'll be right.... :merli:

  • 2 months later...

Sorry to dig up an old thread but I just got rid of my jap tyres for some Adrenalins on the GTR. I replaced 2 front Bridgestone Playz 245/45/17 and 2 rear Bridgestone Potenza GIII (bald) 245/45/17. I got the adrenalins in 235/45/17 as they are not that much narrower than the 245 in width and they were about $200 cheaper per tyre. Do you guys know we get 2 types of Adrenalin in AUS... we get the Oz made ones and the slightly more expensive Jap made ones. I ended up with the Jap ones for $230 each and gotta say I am more then happy with them. ON MY Mazda Familia I have driven on Kuhmo ecsta 711 (shite), Falken 752 (not bad), Good year Eagle GSD3 (excellent), Yokohama S-Drive (excellent) and I can say that the adrenalins are much better tyres than all of them except the s-drive which they are about on a par with.

The tyres that were removed from the front (Playz) are very similar in tread design to the RE001 and they were an awesome tyre, not once did I get any slip from them, where ever I pointed the car it went there. The tyres are about 1000kms old now so will give an update as they wear in a bit more which won't take too long seeing as I do 500km a week just driving to and from work!

On a side note... One thing I will never compromise on is tyres. They are what holds you on the road, although I went the cheaper size I only did this because the difference in width was marginal so not really a compromise IMO plus I saved myself an extra $800!

  • 3 weeks later...

I found it strange my tyres let go on a good downpouring of rain. The road was the rough bituman, and going around a moderately long U bend on a range road. Slipped out quite easily, and I wasn't exactly going fast. Probably a faster than i should've been going, but not fast in my books.

I was doubting the wet performance a bit myself, they feel very confident on the freeway but easy to slip at other times. Interesting that others have found the same thing maybe it's not just me.

Overall a bloody good tyre for the price. And they're still very safe in the wet I just would have liked a bit more grip :P

  • 3 weeks later...

I've got T1R's all round (18's) and need to replace the rears. If the RE001's are cheaper I'll probably give them a go and also post my thoughts here. I've been very happy with the T1Rs, but wouldn't mind something with more bang for buck.

I've got T1R's all round (18's) and need to replace the rears. If the RE001's are cheaper I'll probably give them a go and also post my thoughts here. I've been very happy with the T1Rs, but wouldn't mind something with more bang for buck.

It will be interesting to see what you think of them. Just remember when you compare them that your going from a worn set to a new set so it might feel better off the bat (bar the new tyre squishy feeling). So let them break in for a bit then you'll see their true light.

Let us know how you go :laugh:

  • 2 months later...

Not to bring up a old thread but Im getting some new tyres Friday

I will be replacing the fronts with the Toyo T1R which were originally Bridgestone RE001. So I will see how these go on the fronts to compare the two tires.

I will be putting my 60% RE001s on the rear and wearing them out over the next 5 - 10 000km then putting some T1Rs on the rear also and will compare the two tires. (although the RE001s are only at 60% im pretty sure Ill get a fair evaluations of what they are like as a rear tyre.)

we are still getting tearing from the adrenalins on cars over 270rwkw.... they are great but are separating at the joins. 6 or 7 sets now.... :D

is that with off road driving (drifting, time attack) or with heavy street use? Im guessing track work?

I will be replacing the fronts with the Toyo T1R which were originally Bridgestone RE001. So I will see how these go on the fronts to compare the two tires.

The worst part about changing tyres I have found is tyres that feel great when they're new and aftera couple of heat cycles harden up and feel like your old tyres despite being more expensive and having more tread.

Still finding the RE001's will be very slippery on some road surfaces but it also has to do with tyre temperature, once warmed up they seem to grip better but I will have to undertake more... er.... qualitative studies :D

The worst part about changing tyres I have found is tyres that feel great when they're new and aftera couple of heat cycles harden up and feel like your old tyres despite being more expensive and having more tread.

Still finding the RE001's will be very slippery on some road surfaces but it also has to do with tyre temperature, once warmed up they seem to grip better but I will have to undertake more... er.... qualitative studies >_<

yeah, I must say my initial impressions of the T1R are good, they are impressive thats for sure and I would say their performance is right up there with the Adrenalins.

I haven't had the time on the road that I have had with the bridgestones but i would say their performance from what ive experienced to be much of a muchness. For a street car I don't think you will be disapointed with either tyre.

While i will post up more when i get some more time with the toyos for now Id advise you take the cheapest one. Ring around and see who can get your the RE001s or the T1Rs the cheapest and take those ones.

  • 2 weeks later...
we are still getting tearing from the adrenalins on cars over 270rwkw.... they are great but are separating at the joins. 6 or 7 sets now.... :(

Are they the Jap made ones or the slightly cheaper Aussie made ones??

  • 2 years later...

I have RE001's on my GTS-R, 280rwkw RWD - you can read my post on page 1 for more details.

One of the best tyre for the dollar in the wet that's ever been on it. I've never done burnouts on them etc. I've found in the past doing burnouts on street tyres can make them go "off" and be uttery useless.

If you don't have traction I'd look @ other things like suspenion, diff etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...