Jump to content
SAU Community

Recommended Posts

Keep us updated with your thoughts as they wear in.

I bought a set of brand new Bridgestone Adrenalin RE001s for my R33 GT-R in 255/45 ZR17. That's one at each corner on standard R33 GT-R wheels, with TEIN coilovers.

That was a good few months ago. These tyres replaced Dunlop Direzzas which were on the wheels prior (which were basically bald). Clearly I lost a fair bit of outright grip going to the Adrenalins and certainly a lot of steering response (with the Direzzas nearly bald, steering was on the verge of darty, particularly over bumps and ridges when the car would tramline terribly).

So at first the Adrenalins made me think they were a bit soft and squidgy, despite running around 37-38 psi cold pressure as I usually do. After a little bit of 'spirited driving' here and there I think they've worn in nicely now (either that or the psychological 'novelty' of the tyres has worn off and I've adapted my driving style) and they seem pretty well keyed into the road. In the wet they also seem competent. I have probably driven the car about 6-7 tenths since getting these tyres in the dry, and maybe only 3/10ths in the wet (haven't driven the car much lately) but in those conditions I'm quite happy with them.

I'll soon be getting some 18"x 10" GT-Cs delivered, which I'll need new rubber for, and I'd be happy to go Adrenalin's on those too, but I'll be reading up some more on these and other forums to see what alternatives out there.

Matt

I noticed you said 255/45ZR17. I tried to get these but they don't make them....well they weren't in the catalogue or listed on the website and the dealer said he couldn't get them either. I had to go 255/40ZR17.

I have Adrenalins on my car now.

255/40/17 rear

235/45/17 front

250rwkw, they are better in grip than the 3000A's i had when they were new (XR6 tyre, old gen). And i must admit the 3000A's were amazing considering in 16's they cost me $150ea new in what, '03 :D

The RE001's hold perfectly almost everytime in the dry with full throttle. Wet is surprisingly decent as well, can still get a fair amount of power down before its arguing. I haven't dont any big launches yet to see how they perform off the mark, however rolling starts from 20km/h and WOT are no problem.

Been on several hard twisty runs now also, although im not pushing them as hard as i could as my brakes aren't upto the task yet (warped rotors i need to fix)

So in saying that... They respond really well for a dedicated street tyre... cant ask for much more than that considering the price i paid.

FYI - im also running extra camber and nothing stock suspension wise and so on also which aids for the hill runs and i dont really notice much understeer. So overall very very happy

I'm happy to take your word for it ;)

Good to hear good experiences with these tyres :)

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

I noticed you said 255/45ZR17. I tried to get these but they don't make them....well they weren't in the catalogue or listed on the website and the dealer said he couldn't get them either. I had to go 255/40ZR17.

Good to hear good experiences with these tyres :laugh:

Sorry about that, they must be 40 aspect and not 45. I was also looking at the brochure yesterday and it didn't havt 45 listed. So mine would be exactly the same as yours then...

Might be a problem for me as the only ones in the dimensions close to what I want are 265/35 18 (for my new rims) which means the tyre sidewall will be 92.75mm. The standard tyre for the R33 GT-R on stock 17"s is 245/45 17, or 110.25mm sidewall height. Currently I'm at 255/40 17 or 102mm, so going for 265/35 is going to make the rolling diameter somewhat lower; nearly 20mm less which to me seems signficant. I suppose that as long as all four wheels are the same dimension for the ATTESA-ETS she'll be right.... :merli:

  • 2 months later...

Sorry to dig up an old thread but I just got rid of my jap tyres for some Adrenalins on the GTR. I replaced 2 front Bridgestone Playz 245/45/17 and 2 rear Bridgestone Potenza GIII (bald) 245/45/17. I got the adrenalins in 235/45/17 as they are not that much narrower than the 245 in width and they were about $200 cheaper per tyre. Do you guys know we get 2 types of Adrenalin in AUS... we get the Oz made ones and the slightly more expensive Jap made ones. I ended up with the Jap ones for $230 each and gotta say I am more then happy with them. ON MY Mazda Familia I have driven on Kuhmo ecsta 711 (shite), Falken 752 (not bad), Good year Eagle GSD3 (excellent), Yokohama S-Drive (excellent) and I can say that the adrenalins are much better tyres than all of them except the s-drive which they are about on a par with.

The tyres that were removed from the front (Playz) are very similar in tread design to the RE001 and they were an awesome tyre, not once did I get any slip from them, where ever I pointed the car it went there. The tyres are about 1000kms old now so will give an update as they wear in a bit more which won't take too long seeing as I do 500km a week just driving to and from work!

On a side note... One thing I will never compromise on is tyres. They are what holds you on the road, although I went the cheaper size I only did this because the difference in width was marginal so not really a compromise IMO plus I saved myself an extra $800!

  • 3 weeks later...

I found it strange my tyres let go on a good downpouring of rain. The road was the rough bituman, and going around a moderately long U bend on a range road. Slipped out quite easily, and I wasn't exactly going fast. Probably a faster than i should've been going, but not fast in my books.

I was doubting the wet performance a bit myself, they feel very confident on the freeway but easy to slip at other times. Interesting that others have found the same thing maybe it's not just me.

Overall a bloody good tyre for the price. And they're still very safe in the wet I just would have liked a bit more grip :P

  • 3 weeks later...

I've got T1R's all round (18's) and need to replace the rears. If the RE001's are cheaper I'll probably give them a go and also post my thoughts here. I've been very happy with the T1Rs, but wouldn't mind something with more bang for buck.

I've got T1R's all round (18's) and need to replace the rears. If the RE001's are cheaper I'll probably give them a go and also post my thoughts here. I've been very happy with the T1Rs, but wouldn't mind something with more bang for buck.

It will be interesting to see what you think of them. Just remember when you compare them that your going from a worn set to a new set so it might feel better off the bat (bar the new tyre squishy feeling). So let them break in for a bit then you'll see their true light.

Let us know how you go :laugh:

  • 2 months later...

Not to bring up a old thread but Im getting some new tyres Friday

I will be replacing the fronts with the Toyo T1R which were originally Bridgestone RE001. So I will see how these go on the fronts to compare the two tires.

I will be putting my 60% RE001s on the rear and wearing them out over the next 5 - 10 000km then putting some T1Rs on the rear also and will compare the two tires. (although the RE001s are only at 60% im pretty sure Ill get a fair evaluations of what they are like as a rear tyre.)

we are still getting tearing from the adrenalins on cars over 270rwkw.... they are great but are separating at the joins. 6 or 7 sets now.... :D

is that with off road driving (drifting, time attack) or with heavy street use? Im guessing track work?

I will be replacing the fronts with the Toyo T1R which were originally Bridgestone RE001. So I will see how these go on the fronts to compare the two tires.

The worst part about changing tyres I have found is tyres that feel great when they're new and aftera couple of heat cycles harden up and feel like your old tyres despite being more expensive and having more tread.

Still finding the RE001's will be very slippery on some road surfaces but it also has to do with tyre temperature, once warmed up they seem to grip better but I will have to undertake more... er.... qualitative studies :D

The worst part about changing tyres I have found is tyres that feel great when they're new and aftera couple of heat cycles harden up and feel like your old tyres despite being more expensive and having more tread.

Still finding the RE001's will be very slippery on some road surfaces but it also has to do with tyre temperature, once warmed up they seem to grip better but I will have to undertake more... er.... qualitative studies >_<

yeah, I must say my initial impressions of the T1R are good, they are impressive thats for sure and I would say their performance is right up there with the Adrenalins.

I haven't had the time on the road that I have had with the bridgestones but i would say their performance from what ive experienced to be much of a muchness. For a street car I don't think you will be disapointed with either tyre.

While i will post up more when i get some more time with the toyos for now Id advise you take the cheapest one. Ring around and see who can get your the RE001s or the T1Rs the cheapest and take those ones.

  • 2 weeks later...
we are still getting tearing from the adrenalins on cars over 270rwkw.... they are great but are separating at the joins. 6 or 7 sets now.... :(

Are they the Jap made ones or the slightly cheaper Aussie made ones??

  • 2 years later...

I have RE001's on my GTS-R, 280rwkw RWD - you can read my post on page 1 for more details.

One of the best tyre for the dollar in the wet that's ever been on it. I've never done burnouts on them etc. I've found in the past doing burnouts on street tyres can make them go "off" and be uttery useless.

If you don't have traction I'd look @ other things like suspenion, diff etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • PayPal is a safe, online payment system that enables businesses and individuals to safely send and receive money, making it an indispensable tool in both personal and professional contexts. However, many users wonder how to send money on PayPal? Don't be alarmed if PayPal is new to you - all the steps can be found by visiting merchant sites with links marked "Pay or send money". Once clicked, select payment method, amount, and add message or note for recipient(s). Upon successful transaction completion you will receive an email containing details of transaction. Let’s start by understanding how PayPal works, how money transfers from banks to PayPal and using various payment methods. Moreover, to transfer money between PayPal and bank, head to the Wallet section and click "Add Account", selecting either "Transfer within seconds with debit" or "Transfer between 3-5 days with bank", and following any instructions shown on screen until completed successfully.   How to Send Money Over PayPal: The Basics Before sending money through PayPal, first create an account. Here is how to set-up a PayPal account: ·         Click “Sign Up” on either the PayPal website or app to enter your basic information such as email address or name into their system. ·         Link your bank account, debit card or credit card directly with PayPal so you can fund transactions directly using these accounts. ·         Verifying your PayPal account will enable you to send and receive more funds. Typically, PayPal requires that you verify your credit card or bank account by making small deposits into it. ·         Once your PayPal account has been established, you can send money through it.   How Do I Send Money to Someone on PayPal? After creating a PayPal account, you can easily send money through it. Here is how to send money to someone on PayPal: ·         First of all log into your PayPal account ·         Once on your dashboard, click on "Send & Request Tab." ·         After this enter the recipient's email or mobile phone number. ·         Enter the amount you wish to send to someone. ·         At last, recheck all the details and click "Send Payment" to complete your transaction if everything looks in order.   How Can I Send Money PayPal for Goods and Services? PayPal provides a safe method for individuals and businesses alike to transfer funds online, both personally and commercially. When paying for goods or services there are additional protections in place both for buyers and sellers. PayPal Buyer Protection offers you peace of mind when paying for products or services with PayPal. In the unlikely event that there is an issue with a transaction, if there are any discrepancies you may dispute it and be eligible for a possible refund. You need to follow the same steps to send money, but select Paying for Services or Goods when prompted. In fact, this extra layer of protection will keep your account safe from fraudulent attacks.   How to Transfer Money to PayPal from Bank? Here is how to transfer money from PayPal from bank: ·         Log into PayPal using either its app or website. ·         Click "Add Funds" in the Wallet section, and add money directly from your bank to your PayPal account. ·         If you have linked your bank account with PayPal, select it under Funding options to select it as your funding option. ·         Enter the amount you would like to transfer to PayPal from your bank balance. ·         Click Add Funds. It typically takes several days for funds to arrive on your PayPal account.   FAQ How can I send money PayPal? Log into your PayPal account, select "Send and Request," enter in your recipient's phone number or email address, select the amount due, payment method of choice and click on "Send Now" - quickly and safely sending money via PayPal is now an efficient method of money transfers!   How do I transfer money to PayPal from a bank? Log into PayPal and select "Add Funds" to transfer money from your bank to PayPal. Select your account number, input an amount, and confirm it. Though the transfer may take up to several days for completion.   How do you send money to someone on PayPal? Simply log into your PayPal account, select "Send and Request", enter the recipient's phone number or email address, select the amount to send, and click "Send Now".   How can I receive payment through PayPal? Senders can easily accept payments with PayPal by providing your PayPal email address and being notified via email when a payment has been completed. When funds appear in your PayPal account, they will appear instantly!
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...