Jump to content
SAU Community

Recommended Posts

Brendan..... a nice CCTV setup does wonders...

if you also have a lockup garage... get a security pole put in the ground with a lock....put the pole in behind the car when u get home.....

Your car wont be going anywhere...

I believe an SAFC can be rigged to do the same...you just need the know how to make an easy adapter.........but then of course they would only need another SAFC.

1. Chain the diff to your garage floor.

2. Like the pole idea...just make sure the sercuity pole has a bolt cut defended.....usually have a cover over the lock and lock flange so they can't get the bolt cutter in to cut the lock.

3. multiple locks on garage door (my perference is to not let them near the car...becuase their going to trash it worse if they can get access but can't actually take it.)

4. Cage the car in....a seprate welded and wire cage for the car in teh garage (I know of this been done.)

5. Another suggestion....is have the car stored if its a weekend driver. Plenty of places ofter 24hour access and 24 hour security. I know when i'm going to get the Evo or GTR its going to be possibltly stored at one of these....especailly with carjacks at the garage these day...you drive you car in and out of security and out home in your daily driver.

plus its probably stored under their insurance if they get broken into :D

6. turn the wheels on full lock and run chains to keep it on full lock...that way it can't move forward and out of a garage.

Cool, I think my cas has an SAFC already in it. Have to wait tho to see. (realistically how many carjacking theiving mofos would have a spare SAFC and time to wire in, with them) And if you had a custom quick release plug/interface (no cloured wires) - It would make it more difficult.

What about one of those wheel cage thingys - like the ones they use when you are parked in a no parking area - to imobalise your car ??

Guest darkness

I think also with the PowerFC's you can set a rev limit with the hand controller. therefore when you leave your car drop the rev limit to 500 or something and take the handcontroller. sweet as.

And with the Link you can set the fuel to zero. again won't start.

By By,,,,,He's cool,,,he just loves his Mum and his Skyline,,,,,Gotta Laugh,,,,the Rottie next door is scared shutless of him......

The Pole Idea sounds like a good idea,,,,I'll get one when we up-date.

Neil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Man, different parts but the same numbers is terrible @dbm7! And it doesn't help that most online shops don't list the part numbers at all. They just give a list of compatible models...
    • Slow when hot could also be because its getting more dynamic compression, OR things are getting a bit tighter once it is all expanded. If it were an earthing issue, typically I'd expect you to have it have issues all the time. Unless it's really a combination of both things. Where the higher compression, and things being a bit tighter, is giving that bit of extra load and you do need a slight clean up on the cables/connections.
    • Yeah, this is one of the most annoying things about nissan part numbers... I've got an unrelated example... Image is of the AT output shaft ~ they have the same part#, but clearly the shaft on the left is beefier design to that on the right ...the difference (essentially) is the 'lighter' shaft on the right, is for engines up to RB25DE (this includes RB20 variants) : the shaft on the left is for RB25/26DET(T)....are they interchangeable? Yes...but obviously one shaft is going to be stronger than the other...and, the lighter shaft is around USD115, but the heavier shaft closer to USD150...same part#... ...epc-data usually tells a tale ~ the amayama listing for 39100-23U60 has a note "Longest side is between 60 and 105 cm" ; no such info is there for 39100-23U70 ...and given the great disparity in price between the 2 parts, it makes me at least curious (to the point of caution) where the 'extra money' went? ...ie; these 2 parts have a cost difference that (to myself at least) isn't explained by 'plastic boot'...ie; with amayama there's AUD700 price difference ...plastic versus rubber?...I'm not seeing it like that...and 60cm ~ 105cm...??...that's a huge disparity....something hinky going on here... I'd try searching by VIN, not model... /2cents
    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
×
×
  • Create New...