Jump to content
SAU Community

Adr Or Cam Approved Braided Hoses & Qfm Pads


Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Hi Mark,

I'm after your package #2 deal. Set of ADR approved braided lines and K500 pads front and rear. I've got a 32GTS-t with standard rear brakes but i got R33 brakes for the front which i'm looking at fitting soon. I'm not sure but guessing R32 and R33 brake lines the same length/fittings?

Cheers

Hi Mark,

I'm after your package #2 deal. Set of ADR approved braided lines and K500 pads front and rear. I've got a 32GTS-t with standard rear brakes but i got R33 brakes for the front which i'm looking at fitting soon. I'm not sure but guessing R32 and R33 brake lines the same length/fittings?

Cheers

Hey mate,

The 32 and 33 hoses are different. You will need 32 gtst hoses with 33 gtst fittings.

Just send me a PM when you're ready to order.

Cheers

Mark

  • 2 weeks later...

Just got my lines made up today. Goran was awesome to deal with!

Apologies for not going through yourself, I required to head down there as I needed to customise my lines according to the current set up I had with the hard lines and brackets I had on the calipers (R33 GTS-t calipers on RPS13). The lines were made on the spot whilst I was there :nyaanyaa:

Thanks for the hook ups Mark.

Cheers,

Andy

^ Yeah but Goran won't be. From what he told me, he'll be in only between 11am to 2pm Mon to Fri. He's the man to look for when it comes to the lines...

Also, I used up the last of the braided lines yesterday lol. I needed to go black covered rears and clear covered fronts :)

Might need to wait until the new year champ. Give Goran a call to arrange something.

Cheers,

Andy

  • 4 weeks later...

Been searching & can't find what I'm after so......

How do the K500's compare to EBC Greenstuff for cold & hot stopping ( street use only ) ?

Cheers.

Been searching & can't find what I'm after so......

How do the K500's compare to EBC Greenstuff for cold & hot stopping ( street use only ) ?

Cheers.

http://www.skylinesaustralia.com/forums/Br...gs-t169972.html

Just got my lines made up today. Goran was awesome to deal with!

Apologies for not going through yourself, I required to head down there as I needed to customise my lines according to the current set up I had with the hard lines and brackets I had on the calipers (R33 GTS-t calipers on RPS13). The lines were made on the spot whilst I was there :)

Thanks for the hook ups Mark.

Cheers,

Andy

Goran's great like that! I took photos and measured my ones up on my R34 sedan to be used with R33 brakes, just done the measurements and everything and he had them sent to me so quickly! Very helpful and easy to deal with too :)

Any front pads available for 1998 Stagea Series 2?

These are different to Series 1.

I am in Melbourne if that helps - can they make custom pads?

http://www.skylinesaustralia.com/forums/St...kes-t82083.html

Thanks.

Any front pads available for 1998 Stagea Series 2?

These are different to Series 1.

I am in Melbourne if that helps - can they make custom pads?

http://www.skylinesaustralia.com/forums/St...kes-t82083.html

Thanks.

PM Sent

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...