Jump to content
SAU Community

Recommended Posts

thanks every1 so far with comments, ive been really interested in either the t51r bb Kai or SPL, or t88....single setup tho, but i wouldnt mind keeping the twin setup :), i want to make big hp so keep them coming guys.., i wouldnt mind looking at the twin setup that TiTan come up with "Veilside R32 drag car runs twin GT3582R's"

everything is costly so i might as well go best then cheap!!!

thanks guys

Edited by 74nky
Link to comment
https://www.sau.com.au/forums/topic/237148-rb2630/page/2/#findComment-4175719
Share on other sites

rb26/30 forged rods

pistons, acl bearings, n1 oil/water pumps, arp bolts everywhere. gt4094r single,4"dump.

run 2.5bar boost max 1.5bar by 3600rpm.full boost 4200.

superb turbo for road/track, responsive yet makes the numbers.

Link to comment
https://www.sau.com.au/forums/topic/237148-rb2630/page/2/#findComment-4190710
Share on other sites

rb26/30 forged rods

pistons, acl bearings, n1 oil/water pumps, arp bolts everywhere. gt4094r single,4"dump.

run 2.5bar boost max 1.5bar by 3600rpm.full boost 4200.

superb turbo for road/track, responsive yet makes the numbers.

very impressive. do u have a dyno sheet u can post ?

Link to comment
https://www.sau.com.au/forums/topic/237148-rb2630/page/2/#findComment-4192188
Share on other sites

very impressive. do u have a dyno sheet u can post ?

his post from the dyno thread

did some dyno work yesterday.lol

p.s. figures are bhp @ the flywheel.

--------------------------------------------------------------------------------

well some of you know the car by now, and as i have have fitted a new turbo it was time for a tweek on the map..

still got some misfire issues and could only run 1.9 bar boost, but heres, the graph.

spec is.

rb30 block fully prepped with spool rods and cp forged pistons

n1 oil/water pumps,

jun stage one cams 264/272 9.7mm lift

1000ccs injectors,

twin in-tank tomei pumps feeding both ends of the rail, 8mm return to tank fitted.

gt4094r turbo, 50mm turbosmart gate, 4" downpipe.

plus usual bits lol.

rb30flywheelfigure.jpg

4094rfitted3.jpg

Link to comment
https://www.sau.com.au/forums/topic/237148-rb2630/page/2/#findComment-4192285
Share on other sites

sory to hijack

just on this topic im looking for a turbo a bit bigger than a 3582R but dont want to loose too much response due to car being used for drift.

have a rb30/26, forged pistons, rods, cams, high mount mani, greddy plenum, 100cc injectors and all the usual bits and pieces.

should i just go the bigger rear housing (1.06) or what is the next size turbo up?

cheers

Mitch

Link to comment
https://www.sau.com.au/forums/topic/237148-rb2630/page/2/#findComment-4192483
Share on other sites

rockabilly - whats with the big midrange dip? Your loosing massive mid-range poke from 4700-5800

The line should continue building, and not drop off and resurge

Oh, and if anyone needs a T88 (saw it mentioned earlier) i know of a kit for sale. PM me if interested

Link to comment
https://www.sau.com.au/forums/topic/237148-rb2630/page/2/#findComment-4194618
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
×
×
  • Create New...