Jump to content
SAU Community

Recommended Posts

Make: Nissan

Model:1993 R32 Skyline

Milage:139,000

Transmission: Manual

Colour: Black

Location:Melbourne

Complied? Yes

RWC supplied? Optional

Currently registered?Yes, 12 months rego.

Price: $13,500 with wheels. $12,000 without.

Contact:0401 906 086

Comments / Modifications: 1993 model R32 skyline

Exterior: Black, 19 inch Gold RS-GT's, Matches the Black perfectly.

Interior: Very clean interior- Grey in colour, Clarion Deck with Clarion 6 inch speakers, 2 Drift gauges. Bar & Oil pressure,

Running Gear: RB20 Turbo, Runs Perfect and is a quick car. Custom Front mount intercooler, Boosted to 14psi, 5 speed manual with short shiftert and heavy duty cushion button clutch just installed, serviced not long ago. has Turbo timer also. Airflow metre in cooler pipes which means it has a preety nice dose. Much like a VL turbo but better. stock dump pipe but goes to a 4 inch exhaust system. Veryy quick and reliable car. Never had a problem. hardly driven, mostly on weekends and sure is a head turner. Selling due to upgrade to R32 GTR. Will swap for GTR and any requirements ontop.

Images:

dsc00067cp9.jpg

w640.png

dsc00079qe5.jpg

w640.png

l1fc1b9442971517a54bff3fq9.jpg

w600.png

labd68beb2387b3775e2773un9.jpg

w600.png

lb3b675c969a7646457c14dkj4.jpg

w600.png

photo0012jz4.jpg

w480.png

Link to comment
https://www.sau.com.au/forums/topic/237187-1993-r32-nissan-skyline/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
    • Fuark, at least the motor survived. What brand was the fitting that snapped?
    • Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
    • Measure voltage at the starter solenoid terminal when the key is at start and it has clicked. If it is really low, then the suspicion falls on the ignition switch (contacts or wiring thereof) as causing a voltage drop instead of sending enough volts to throw the solenoid all the way to engage the starter itself. If it is a decent voltage, then the suspicion is on the solenoid. Might have s horted coil, or might hva dirty contacts. Rip the starter off, dismantle, clean up contacts and inspect winding. It might not be possible to see if there is a short in the winding though. I have a spare starter here that I could measure the resistance of the coil, as a guide to about what it should be, if you need a comparison. <parts hoarder>No you cannot have it.</parts hoarder>
×
×
  • Create New...