Jump to content
SAU Community

Recommended Posts

Hi,

I've always wanted to have a skyline, and after driving a 99 wrx around for my first 18 months I'm looking to buy an R33 GTR.

I have been looking at a vspec r33 gtr from vic auto mart in Fawkner but not too sure if its an actual vspec model or if its just a gtr.

Can anybody give me some advice on what to look for when buying a gtr and how to pick out whether it is what they say it is. Ill add a link to the car i have been looking at.

http://www.carsales.com.au/used-cars/deale...amp;Make=NISSAN

Any help would be great.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/237961-buying-an-r33-gtr/
Share on other sites

get a compression test and a leak down test before anything make sure thats all good

get someone to drive and and u sit behind it make sure no white smoke comes out the exhaust

check the plugs while your there make sure they not white or very dry some a few things to look for

hope it helps u out

The V-Spec rear diff has cooling fins on it. The Standard GTR does not.

There are some other differences such as lower susp'n and its hardness & different tailshaft but the diff is the most obvious.

Besides above post, check all service history + logs. If that's not available, check for sludge around oil filler opening.

Check for rust

Check for damage under boot carpet and scratched panel bolts in the engine bay. If Auction report says that the condition of the car is 4 or less out of 5, then there may have been some damage repair. Just make sure it's fixed correctly.

See whether or not the odometer reading and auction statement of odo, correspond with wear on carpet, seat bolsters, steering wheel, gear shift lever. And if there are logs, see if the last entry odo reading (using a Japanese friend literate with the log entry) corresponds with the auction report.

I hope that's a great car for you - because if everything checks out, it should be...

Tez

Hiya,

You'll see the fins by popping your head underneath the rear. No need to put it up on the hoist.

But I'd certainly put it up on a hoist if only to check for rust, seepage, bushes, drive shaft boots, damage etc.

For example, if there's seepage coming down from the crankshaft seal, it'll cost heaps to replace the oil pump.

A genuine low Km, completely serviced, undamaged R33 GT-R V-Spec in great condition, may set you back $25K.

I wouldn't pay any extra for modifications unless it's extremely high quality and it's taken care of by an enthusiast.

At one extreme, you can get lower grade GTRs for $21K; and at the other extreme, a low Km LM model will still be well over $32K.

Cheers,

Tez :nyaanyaa:

R33 GT-R? Still a great shape - great car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
×
×
  • Create New...