Jump to content
SAU Community

Recommended Posts

im thinking of buying a s2 r33 skyline and was wondering if anyone has had trouble getting their car up steep driveways?

i live in nsw and dont know if any other state has the same entrances to their driveways. but i have one of those rounded entrances (as opposed to the flat ones), do these pose any problems for stock ride height on the skylines?

im afraid that when i do buy one that the car will scrape like crazy, so i was hoping someone would give me some advice before i make my purchase.

Link to comment
https://www.sau.com.au/forums/topic/23882-driveways/
Share on other sites

my driveway is really steep, and as long as i go up the gutter sidewaysi get up no prbs, my front bar sits abot 80mm off the ground is a lot longer the stocko which makes it terrible for speed bumps and the like but no prbs on the driveway.

Link to comment
https://www.sau.com.au/forums/topic/23882-driveways/#findComment-511068
Share on other sites

I have a 32 gtst at stock ride height, and have had no worries. Only scraped once (because i was going too fast). When i was looking at buying one, my folks were like, 'do u think that will scrape in the driveway?' That was one of their ways to tell me not to buy a line.

As for your driveway crossover (at the start near the road), it should meet council standard, because it is within council property. post some pics up. What sort of kerb is there? Mountable or barrier? I design roads, commercial driveways & carparks, might be able to help u out...

Link to comment
https://www.sau.com.au/forums/topic/23882-driveways/#findComment-511247
Share on other sites

the "cross over" part is rounded, thats what i was trying to say above. in sydney or my area atleast there are two types the rounded ones

__

(

or the flat ones

______

/

well thats the best i can do at the moment LOL..

ill do my best ot get my digi cam up and running tommoz.

thanx for the replys guys :)

Link to comment
https://www.sau.com.au/forums/topic/23882-driveways/#findComment-511389
Share on other sites

Originally posted by a5h

mine is stock height and it scrapes all the time it gives me the shits

yeah... but you don't have a stock front bar :)

those GTR-style front bars can be pretty low, i've known a few ppl who have munched them on gutters lol

ac1d3o3, can't speak for a series2 but i never have any problems whatsoever with a series1 (stock height, stock front bar).

Link to comment
https://www.sau.com.au/forums/topic/23882-driveways/#findComment-511557
Share on other sites

my driveway is a bitch squared

its a tight turn off a busy up hill street on a corner witha power pole in the road :)

we've had that many near misses with retards thinking they can come screaming up the inside (the direction im turning off)

then just to make things interesting, i scrape f*ck out of my front bar if im not super close to the fence backing out and turning;

it took us ages to work out what position to be in, not to scrape, but i think the damage has been done

my front bar is just about scraped all the way through :)

sure beats our old drive way though (would have been no way to get the skyline up the old driveway)

Link to comment
https://www.sau.com.au/forums/topic/23882-driveways/#findComment-511638
Share on other sites

When i picked up my car from the importer it had realllyyy low blistern suspension in it and the first time i tried to take it up my driveway no matter how many angles i tried it would get stuck half way up. I ended up cracking the front bumper a bit and had to take it back to the importer and put in some slightly higher springs in. Now it just makes it up with about 2mm clearance to the bumper and i have take it fully sideways. I have a 400r front bar and they hang down real low compared to the stock front bars.

Link to comment
https://www.sau.com.au/forums/topic/23882-driveways/#findComment-511766
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...