Jump to content
SAU Community

Recommended Posts

Hi guys,

Im just wondering if anyone here has got or heard off the following mod's . And if so is the performance alot different to the standard .

Thanks in advance for any help.

http://translate.google.com.au/translate?h...l%3Den%26sa%3DG

plus FUJITSUBO exhaust system .

Link to comment
https://www.sau.com.au/forums/topic/238943-v35-increased-performace/
Share on other sites

best to check out the v-series skyline section. a large portion of the stuff here is more RB related than VQ.

however any general induction and exhaustion mods will reap good gains as most cars come with restrictive systems from factory.

best to check out the v-series skyline section. a large portion of the stuff here is more RB related than VQ.

however any general induction and exhaustion mods will reap good gains as most cars come with restrictive systems from factory.

Thanks for that , where is the v-skyline section ??

I believe the standard exhaust system for the VQ engined cars is pretty good from factory, limiting gains for aftermarket parts.

No there not very good at all, exhaust and headers will see good gains.

On the induction side of things all the jap tuners seem to stick with the factory airbox, panel filter and a 350z intake tube, where as the yanks all swear by the JWT pop charger (pod air filter with cold partition.

Personally i think mine went a little better with it on.. ill hopefully be doing a back to back dyno on tuesday should be interesting.

A computer or unichip with a good tune will also see good gains.

  • 2 weeks later...
No there not very good at all, exhaust and headers will see good gains.

I saw some pretty good gains with my catback on the Z33 just by itself, equal to when I did the extractors and cats and had my Unichip retuned to suit. The catback was a lot cheaper to do, though.

On the induction side of things all the jap tuners seem to stick with the factory airbox, panel filter and a 350z intake tube, where as the yanks all swear by the JWT pop charger (pod air filter with cold partition.

The Popcharger is great for noise, but does sweet FA for power from what I could feel. You're better off with just a drop-in K&N filter, performance-wise.

Hey alan,

Just had mine on the dyno again with the pop charger on this time and a different exhaust and im 10kw's down across the board. The exhaust change went from cannons to tri-flows at the rear the rest remained the same, headers to 2 1/2" pipe, highflow cats and x pipe. Might look into a brand name exhaust down the track, i still hate the exhaust note currently, it sounds like a bloody honda... and i would like that 10kw's back...

Fark, that sucks. I'd want that power back too - its not like we started with that much.

I heard a Fuji catback on mxfly's Z33, and I really like that note it made. It had a distinct turbine-like sound to it, kind of like Holden V8s do. It sounded really good.

I don't know what he was running north of the catback, since the car was being returned to stock for sale, but it wasn't particularly loud either.

Hey guys, I THOUGHT I WOULD POST THIS UP.... im still under the cloud wether to go f/i or keep the vq as a N/A breathing machine...

After hours on the net browsing different options, ive come past this, its still preety new in the states and not many guys have done it yet.....

The main problem they are finding is that this set up genreates alot of heat -though a simple custom airbox could do the trick like the one below found in on an alfa(pictured below)...... i know F/I is the easiest way to get horsepower... though the N/A sound is one that i cant just let go of.. especially after i get these tomei headers...

post-55721-1224394574_thumb.jpg

post-55721-1224394580_thumb.jpg

post-55721-1224394588_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...