Jump to content
SAU Community

Recommended Posts

hey folks, ok basicly my car is stalling while im moving, an it tends to be in 5th gear and when im clutching in, thats when this has happend, luckily ive been driving in a straight line because the steering goes when this happens so ive been lucky so far but i need to get it fixed asap, anyone know why and how to fix this?

note i recently installed a pod and put new oil in the gearbox, theres another thread on here regarding the oil i put in but no one has answered and i realy need this solved, basicly in regards to the oil i put in 3 litres according to the help from autobarn, and that worries me alone.

Anyone know whats going on and how to fix this?

cheers

Link to comment
https://www.sau.com.au/forums/topic/239094-car-stalling-need-help/
Share on other sites

hey folks, ok basicly my car is stalling while im moving, an it tends to be in 5th gear and when im clutching in, thats when this has happend, luckily ive been driving in a straight line because the steering goes when this happens so ive been lucky so far but i need to get it fixed asap, anyone know why and how to fix this?

note i recently installed a pod and put new oil in the gearbox, theres another thread on here regarding the oil i put in but no one has answered and i realy need this solved, basicly in regards to the oil i put in 3 litres according to the help from autobarn, and that worries me alone.

Anyone know whats going on and how to fix this?

cheers

Ok thats really weird cause my car just started to do that, out of the blue really but has happened only twice will post if anything knew happens otherwise will be following this thread closley

i forgot to mention it sputters while cruising, like vvvvvv.vvvv.vvvvvvvvv.vv every now and then. also, i was testing it a bit and it only stalls when i hold the clutch in to long when changing gears. the revvs just drop like a rock, so i goto keep blipping the velocitator to keep it from stalling, any difference in story?

cheers

Mine is stalling a little often at the moment too... ...but when I go from 1st to Neutral... ...and mostly while turning while doing that... ...eg three point turns...

But it's been a while since I got it serviced (damn cash flow)... ...So I think it will be picked up in my next service...

its the afm 100% you probably havent clamped the pod on properly. Ages ago id taken the lid off my airbox to get that gay woosh sound and for about a day the car would stall like urs too until the computer kind of worked out what the hell was going on and it went away. If the car wasnt doing it prior to the pod being installed then chances are its something to do with that.

good luck!

cheers mate, i think your right, i had a glance last night, and i might have found some spots, i really thought it was the computer cracking the shits, but still hasnt worked out the right amount of fuel/air ratio. awell, will pull apart and start again lol.

oh P.S is there a way to reduce the WHOOSH sound the pod makes? it sounds a bit wankish lol

PEACE

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...