Jump to content
SAU Community

1993 R32 Gtr, 500 Km's Since Full Rebuild $20k

GTAAAH
 Share

Recommended Posts

GTAAAH Mentor

GTAAAH

Posted
Posted (edited)

Make: Nissan Skyline GTR, 1993, r32

Milage: 140,000 km's

Colour: gunmetal

Location: Melbourne

RWC supplied? Yes

Currently registered? Yes

Price: $20,000

Contact: PM preferably

Comments / Modifications: Freshly rebuilt 500 k's ago, have only done about 6000 km's since purchasing it, it leaned out too much a while ago and 3 of the pistons melted so i haven't put too many k's on it. Guy i purchased it off used it as a bit of a run around, car has a scratch on front bumper and lip and next to rear headlight (that will probably need fixing to look good, it's about a $600-700 job at most beaters) Other than that it's straight, paint is in good condition, few minor dents, nothing really noticeable. Interior is in good condition but drivers seat has some wear (partially torn patch about 3 " by 1") Gearbox and diffs etc have all been checked out and are in good condition. Car has no crash history

Very original car, good if your looking for power but a standard look (i haven't been pulled over since buying it, used to get pulled over all the time in my old gtst)

Modifications: - Engine just rebuild 500 km's ago with full receipts at a price of $10400

Car has GAB Coilovers, standard rims with some decent tyres (+ a few spares of the same brand/size) and new pads/rotors.

Standard turbo's (replaced one with the rebuild because it was on the way out)

CP Pistons

Eagle H beam con rods

New main/rod bearings

bored and honed, surfaced, crack tested block

Linished and balanced crack

ARP Head Studs

Reco'd head, valves and reset valve clearances

New timing Belt

Adjustable cam gears

Tomei metal headgasket

N1 Oil Pump and drive

New water pump

New engine mounts

New tensioner and idle pully

Heavy duty clutch, cushioned so it's not a pig to drive but it will handle 320kw (800km's ago)

R33 AFM's

Twin *drift* pod filters

JJR Coil Packs

Has a 3" catback system with a hkz super dragger muffler, sounds awesome

-

Full service including oil filter, plugs, coolant, p/s fluid

Engine was built to handle good power, i had plans for twin 2530's and about 350-400kw eventually but ended up getting poor so now i'm gonna sell it and buy i don't know what, will have a dyno next week need to get a few more k's up on it

Just put in a new Pioneer head unit ($300 unit) and have a exelsior kenwood sub (was $240 about a year ago, sounds great) and a brand new kenwood KAC-1204 amplifier (400 retail) that i haven't used and haven't installed yet

Also comes with plates GTAAAH

Few pics below of the rebuild and the scratches on frontbar

Images:

post-26886-1223333055_thumb.jpg

post-26886-1223333156_thumb.jpg

post-26886-1223333204_thumb.jpg

post-26886-1223333363_thumb.jpg

post-26886-1223333468_thumb.jpg

post-26886-1223333509_thumb.jpg

post-26886-1223333580_thumb.jpg

Edited by Neil
  • 2 weeks later...
  • 2 weeks later...
GTAAAH Mentor

GTAAAH

Posted
  • Author
Posted

bump, paint has no peeling, flaking etc.. paint is a good coat, original factory spray, all pretty nice except for the few little scratches pictured above, not much to repair.. The engine will net you alot of RELIABLE power once you throw some turbo's on, shouldn't have problems netting 320kw with some 2860-7's, with no supporting mods.. Has original GTR everything, if your after a Godzilla, for a decent price here it is..

2000km's since rebuild now, engines under warranty for quite some time yet, FULL year registration and RWC supplied

Weapon Mentor

Weapon

Posted
Posted
I got $15000

ahhh thats pretty low ball, i think the car itself is worth more than $5k as the engine is atleast worth $10k lol

Free bump just bought a 32 GTR myself for $25k, i don't regret it one bit. best thing i did was piss off my 33 GTST and get into a better machine

subzeroR33 Mentor

subzeroR33

Posted
Posted (edited)
ahhh thats pretty low ball, i think the car itself is worth more than $5k as the engine is atleast worth $10k lol

Free bump just bought a 32 GTR myself for $25k, i don't regret it one bit. best thing i did was piss off my 33 GTST and get into a better machine

Well there are a few reasons i offered $15,000.

He can only say NO piss off, if you dont ask you never know.

It must be a hot GTR for 25G's any pics PM Me some.

And a free bump.

Edited by subzeroR33
GTAAAH Mentor

GTAAAH

Posted
  • Author
Posted (edited)
Well there are a few reasons i offered $15,000.

He can only say NO piss off, if you dont ask you never know.

It must be a hot GTR for 25G's any pics PM Me some.

And a free bump.

Nah sorry dude, 15k is far less than i want for it, maybe if the engine hadn't been rebuilt 2000 km's ago i might consider it or 16k.. it is a 93 and they do net slightly more cashola.. mechanically it's perfect, only a few lil problems, few hundred bucks and it'll be perfect

Bump, want 20 now, don't want any lower, if car doesn't sell will respray the front and rear bars so it's perfect again and take another stab in a few months.. markets dying in the ass

Edited by GTAAAH
GTAAAH Mentor

GTAAAH

Posted
  • Author
Posted

cheers dude, i wish i had bought something like this originally, would have saved me alot of money, but noo i wanted to risk the stock engine..

Car is now $20k including RWC

GTAAAH Mentor

GTAAAH

Posted
  • Author
Posted

Bump, getting the car resprayed, price is likely to go up to about 23,000 to compensate for the expensive spray job.. should help the car sell faster though, even with this recession thingo..

Mobile number is 0421654914 if anyone wants to call to have a chat

  • 1 month later...
GTAAAH Mentor

GTAAAH

Posted
  • Author
Posted

car in workshop, getting front back and back quarter resprayed, rest are already in vgc... back bumper was scratched by a truck bout 2 weeks ago, so thought i may as well spray any other scratched panel's while it's in.. paint will be perfect once this is done

GTAAAH Mentor

GTAAAH

Posted
  • Author
Posted (edited)

Yeh i'm a bit confused myself, hopefully the market will pick up again..

Price will be increased to 21500 again once paint is all 100% (front bar/lip (scratches), front RH quarter (little scratch) rear bumper (truck scratch) rear RH quarter up to roof/door (truck scratch) all getting resprayed, was going to fully respray car but the rest of the paint is in perfect condition so no point), minor tear on drivers seat will be fixed.

Low price was due to xmas and current economics + the scratches which are getting fixed, cheers

Edited by GTAAAH

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      eBay "Hella" oil level sensor

      By PranK · Posted

      Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • Kinkstaah
      Jacks that fit under GTR lips that can reach the subframe?

      By Kinkstaah · Posted

      I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • TurboTapin
      Jacks that fit under GTR lips that can reach the subframe?

      By TurboTapin · Posted

      So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...