Jump to content
SAU Community

Oxidation

Robbo_05
 Share

Recommended Posts

Robbo_05 Explorer

Robbo_05

Posted
Posted

Hey guys, just trying to sort out the little things that annoy me and my main one is oxidation on the windows that give it a bubbly look. Its only on the surface and just wondering if anyone else had this problem and how'd they fix it. Just need to know if it has to be done professionally or is there some sort of abrasive cleaner that will clean it off.

Much appreciated if anyone has any ideas.

Link to comment
https://www.sau.com.au/forums/topic/239343-oxidation/
Share on other sites
Robbo_05 Explorer

Robbo_05

Posted
  • Author
Posted

Haha yeh have tried that but didn't work unfortunately. Also tried cleaners like windex but that doesn't work either, might have to have hit and miss with other cleaners. I'll try and take photos of what it looks like but don't think it'll show up too well. Its just one of those annoying things u could live with but because I want everything perfect on this car it is annoying me knowing that its there.

Link to comment
https://www.sau.com.au/forums/topic/239343-oxidation/#findComment-4181525
Share on other sites
n15m0 Grand Master

n15m0

Posted
Posted

Hi Mark,

If you are refering to those water marks then I have the same issue on both my 35s. Pisses me off to no end! Most visible under bright sunlight. I've tried a few different polishes, turps, metho etc...nothing has worked so far. Someone on the forum has recommended Meguiars Diamond Cut. Haven't got around buying it yet to try. If you find a solution let me know.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/239343-oxidation/#findComment-4182477
Share on other sites
Stephen Thorpe Proficient

Stephen Thorpe

Posted
Posted (edited)

Back on subject, I would suggest that you get the opinion from a Car Windscreen installer, there are some lightly abrahesive 'chemical based cleaners out there and they can buff the window too...

That should lift most blemishes.

Edited by Stephen Thorpe
Link to comment
https://www.sau.com.au/forums/topic/239343-oxidation/#findComment-4183451
Share on other sites
QuMii Rookie

QuMii

Posted
Posted
Hey guys, just trying to sort out the little things that annoy me and my main one is oxidation on the windows that give it a bubbly look. Its only on the surface and just wondering if anyone else had this problem and how'd they fix it. Just need to know if it has to be done professionally or is there some sort of abrasive cleaner that will clean it off.

Much appreciated if anyone has any ideas.

Try AutoGlym Car Glass Polish

http://www.carcareproducts.com.au/product/...ar_glass_polish

I used it on my Lexus IS250 windows when I saw it had like dried water droplets etched on the windows... worked wonders.

Link to comment
https://www.sau.com.au/forums/topic/239343-oxidation/#findComment-4183652
Share on other sites
n15m0 Grand Master

n15m0

Posted
Posted
Just tried the Autoglym car glass polish with no luck. Looks as tho it may have to get done professionally.

LOL! I tried Autoglym as well bout 1/2 an hr ago...no dice :ermm: All it did was made my glass really smooth...damn water spots still there...

Link to comment
https://www.sau.com.au/forums/topic/239343-oxidation/#findComment-4189916
Share on other sites
GEXer Enthusiast

GEXer

Posted
Posted

like i said the marks r probably caused by acid rain, which has "dissolved" a really really thin surface layer of the glass... the only way I heard to remove this is using a steel wool to lightly polish the glass, so u can "even" out the layers. Again, i've never seen this done in real life, and personally I dont think steel wool + glass is a good combination.

Link to comment
https://www.sau.com.au/forums/topic/239343-oxidation/#findComment-4191018
Share on other sites
Stephen Thorpe Proficient

Stephen Thorpe

Posted
Posted
like i said the marks r probably caused by acid rain, which has "dissolved" a really really thin surface layer of the glass... the only way I heard to remove this is using a steel wool to lightly polish the glass, so u can "even" out the layers. Again, i've never seen this done in real life, and personally I dont think steel wool + glass is a good combination.

Glass can be polished but not like that... Steel Wool is a big no no in my opinion.

See a professional.

Link to comment
https://www.sau.com.au/forums/topic/239343-oxidation/#findComment-4192353
Share on other sites
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • aneesr34
      Stock Airbox and Snorkle for RWC - VIC west

      By aneesr34 · Posted

      Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Dose Pipe Sutututu
      EFR7670 exhaust housing selection RB26

      By Dose Pipe Sutututu · Posted

      Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • GTSBoy
      EFR7670 exhaust housing selection RB26

      By GTSBoy · Posted

      People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • r32-25t
      EFR7670 exhaust housing selection RB26

      By r32-25t · Posted

      1.05 you’ve gotta let it breath 
×
×
  • Create New...