Jump to content
SAU Community

Fs: 18x8.5 +30 Rays Gold Volk Racing Forged Ce28n+tyres

Skyalwaysblue
 Share

Recommended Posts

Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
Posted (edited)

Item: Genuine 18X 8.5 +30 offset GOLD VOLK RACING CE28N FORGED RIMS + TYRES

PCD: 114.3X5 and 100x5 multi stud pattern. They are forged rims from RAY Volk racing series. Their weight is 17.3 lbs about 6.45kg per rim which is lightweight and super strong!

Detail of the tyres:

Tyres are BRIDGESTONE RE750 DOT approved, unfortunately one tyre sidewall got punctured a few weeks ago and I replaced by Yokohama A drive R1.

So that's 3 X 235/40/18 BRIDGETONE RE750 TYRES 85% thread left, 1X YOHOHAMA A DRIVE R1 95% thread left.

Condition:

Very clean except some light wear and tear in stud areas(caused by removing wheel nuts)which is very normal, center and valve stem caps are not included in this sale due to stolen by some boring low life idiots. Volk racing and CE28N and wheel spec and factory quality guarantee stickers still there, except one CE28N sticker came off due to heavy brake dust.

Price: $4500 ono

To Fit: (What car)It will suit EVO 6 to EVO 10 without rubbing,rollling and spacers. Also can be used for Nissan GTR 32,33,34 etc.

Location:Melbourne

Contact:CE28N rims and tyres combo can be inspected by appointment for Melbourne buyers. Please do some homework and research for the price of rims and tyres before making your offer.

Send your offer to me via PM

Comments:Selling due to loss of license for 6 months will get it back until 2009, I will be travelling overseas at end of this month.

R02.jpg

w1-1.jpg

w2-1.jpg

w3.jpg

YR1.jpg

099.jpg

087.jpg

b1.jpg

103.jpg

Pics didnt do the justice! :)

Edited by Skyalwaysblue
femno Grand Master

femno

Posted
Posted

yeah considering theres no centre caps, a sticker missing, and skinny 8.5 width its a bit much...might sell if you drop a little.

also that offset isnt ideal for gtrs esp being only 8.5 wide just so you know.

bump for a tops wheel anyway.

Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
  • Author
Posted
yeah considering theres no centre caps, a sticker missing, and skinny 8.5 width its a bit much...might sell if you drop a little.

also that offset isnt ideal for gtrs esp being only 8.5 wide just so you know.

bump for a tops wheel anyway.

Hi mate

I dont mind about your rude reply, however I hope you could show some respect to the forum members :(

Genuine buyer will contact me via PM so there is no need you tell me what to do.

Good or not buyer will justify that, if buyer after center caps and one missing sticker I can organize that thats not the problem. I can get new one from RAYS JAPAN.

Please keep the for sale thread clean! Thank you! :)

Marko R1 Grand Master

Marko R1

Posted
Posted
yeah considering theres no centre caps, a sticker missing, and skinny 8.5 width its a bit much...might sell if you drop a little.

also that offset isnt ideal for gtrs esp being only 8.5 wide just so you know.

bump for a tops wheel anyway.

i dont think femno is being rude, just upfront & honest that this particular offset will not work on a gtr as i recently bought a set for my gtr

better ppl know what to expect when buying goods

nice wheels though, 1 of my favourites :banana:

Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
  • Author
Posted
i dont think femno is being rude, just upfront & honest that this particular offset will not work on a gtr as i recently bought a set for my gtr

better ppl know what to expect when buying goods

nice wheels though, 1 of my favourites :banana:

It work perfectly on GTR if you have a JDM Hyper Rev tuning magazine you can check it out. will suit 245,255 width tyres as well. Pls do not reply if you are not interested.

Thank you!

Marko R1 Grand Master

Marko R1

Posted
Posted

yes it would work on a gtr but will sit in 8-15mm more than it should in this is not even taking into account the width which is less than recommended 9.5-10"

i.e. optimal offset for r32gtr for example is +15 or +22, with r33/r34gtr the offset would need to be even more aggressive (each to their own i guess)

no harm intended :banana:

WARLORD Veteran

WARLORD

Posted
Posted
yes it would work on a gtr but will sit in 8-15mm more than it should in this is not even taking into account the width which is less than recommended 9.5-10"

i.e. optimal offset for r32gtr for example is +15 or +22, with r33/r34gtr the offset would need to be even more aggressive (each to their own i guess)

no harm intended :banana:

i second that.

Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
  • Author
Posted (edited)
yes it would work on a gtr but will sit in 8-15mm more than it should in this is not even taking into account the width which is less than recommended 9.5-10"

i.e. optimal offset for r32gtr for example is +15 or +22, with r33/r34gtr the offset would need to be even more aggressive (each to their own i guess)

no harm intended :P

If you wanna discuss about offset issue pls start your own thread.If you are not intend to buy no spamming!Thank you!

Edited by Skyalwaysblue

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Murray_Calavera
      WTAC 2025

      By Murray_Calavera · Posted

      Yeah mate, never miss it.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Any going to watch World Time Attack at SMSP this year?
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
    • zillah
      Recommendation for engine oil funnel spill free

      By zillah · Posted

      hahaha good on
×
×
  • Create New...