Jump to content
SAU Community

Recommended Posts

....title is a monty python quote... anyway...

anyone know if it's possible to remove the dinger from under the dash without effecting anything else?

I haven't looked yet, but I'm sick of the chime when i leave the keys in ignition and open the door, and headlights on, etc. etc. so annoying

so yeah anyone know if its safe to unplug?

Link to comment
https://www.sau.com.au/forums/topic/239740-the-machine-that-goes-bing/
Share on other sites

....title is a monty python quote... anyway...

anyone know if it's possible to remove the dinger from under the dash without effecting anything else?

I haven't looked yet, but I'm sick of the chime when i leave the keys in ignition and open the door, and headlights on, etc. etc. so annoying

so yeah anyone know if its safe to unplug?

I had the same problem with mine, i got that pissed off with it that i pulled half the dash out trying to figure out where it was coming from. Anyway if u look up behind the dash above the coin tray ull see a white box. it unclips pretty easy, unplug the plug and pull the white box out. Here comes the fun getting into the box. They dont open easily so u might have to prise it open with a screw driver or cut it open with a hack saw. inside ull see a silver colour speaker type thingy. Get ur screw driver and rip the guts out of it. and the plug it back in and clip it back on that way everything still works and it will get rid of that anoying binging sound. YAY

ive heard that if you pull open the gear selector surrounding, next to the R bit. there is a wire... if you disconect that it shoudl just remove the reverse beep, other alternative is to leave you headlights on auto... that way they turn on and off with the car... thats what i did anyway :spank:

Hey guys i was doing a speaker install (sic) on my S1 on sunday and i found a really simple way to stop the beeps all together, just get under the dash remove the plastic cover and get to where the fuses are.

towards the back right behind a bunch of wires and fuse box you will see a black box with a white wiring plug going into it, i think the box has something like "nissan smart entry system on it" something like that it could be completely different but you will recognize it by its stupid title. If you leave your keys in the ignition with the door open you wont miss where exactly the noise comes from.

pull out the plug (this will stop your central locking/alarm from working) and remove the box , the easiest way into the box is through the top end where the plug normally inserts just get a small screw driver and you can take the plastic surrounding the plug off then remove the circuit board.

the black capacitor looking thing is what makes the noise so all i did was get a adjustable wrench and carefully pried the black dome off. the dome is what housed the speaker so get rid of that and the circuit board thinks it still functions but no noise!!!

put everything back together and your locking should work and no more reversing death!

ive heard that if you pull open the gear selector surrounding, next to the R bit. there is a wire... if you disconect that it shoudl just remove the reverse beep, other alternative is to leave you headlights on auto... that way they turn on and off with the car... thats what i did anyway :(

does not work with turbo timer tho. i did it once by mistake, cause engine still running when you get out and lock the doors. my security light came on, and the sensor turned the lights off in the car.

got inside, when security light turned off the headlights came back on. all night, woke in the moring to a well light driveway.

lucky for a brand new dry cell i put in a week earlier :bunny:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...