Jump to content
SAU Community

Recommended Posts

i had 230 ish and that was wheelspin delux!

no point going > 250 ish without awd imho

good luck! let us know how it goes!

its partly throttle control, brand of tyre, and width of tyre

Cubes has 300 and can get enough traction

and now i have 255x17x40 mine doesn't brake traction nowhere near as much

  • Replies 143
  • Created
  • Last Reply

Top Posters In This Topic

haha nice work man, ill see ya at Willall on Monday aswell, My car's done now just waiting for monday...

280-300rwkw here i come

Cool mate what Turbz you running now? I will be dropping off car at 7.30 and should be back there by 12ish be good to see your beast there also good luck with it mate.

i had 230 ish and that was wheelspin delux!

no point going > 250 ish without awd imho

good luck! let us know how it goes!

I must admit i might have to sus out my suspension, beacause its not liking grip in first even with 265 Hankook V8RS rubber and 200rwkw. Wheel spin is fun tho! :D

i had 230 ish and that was wheelspin delux!

no point going > 250 ish without awd imho

good luck! let us know how it goes!

268rwkw I had no issues getting the power down once I dropped on a set of better tyres.

300rwkw is a little harder but it still hooks up well and is quicker up and rolling even when it is spinning/bucking around a little than when it was hooking up and making 268rwkw.

Low profiles = FTL if you want to get the power to hook up. You need preferably 16" with a bit of a side wall or at the very most 17" no more.

I ran around on a set of wide 18's and they were useless for straight line grip compared to the 16's.

Cool mate what Turbz you running now? I will be dropping off car at 7.30 and should be back there by 12ish be good to see your beast there also good luck with it mate.

Gt35r with a .63 rear, should see a good kick in the back about 4k...laggy i know but i've had a responsive turbo, now im wanna pull some good power and see what that brings.

268rwkw I had no issues getting the power down once I dropped on a set of better tyres.

300rwkw is a little harder but it still hooks up well and is quicker up and rolling even when it is spinning/bucking around a little than when it was hooking up and making 268rwkw.

Low profiles = FTL if you want to get the power to hook up. You need preferably 16" with a bit of a side wall or at the very most 17" no more.

I ran around on a set of wide 18's and they were useless for straight line grip compared to the 16's.

Can i ask what size and what brand your using joel? I'm keen to put stockies back on it for a bit.

its partly throttle control, brand of tyre, and width of tyre

Cubes has 300 and can get enough traction

and now i have 255x17x40 mine doesn't brake traction nowhere near as much

yeah, you got a point.

i had 19s with 245/35 s, not really a good choice in tyre/size.

i learnt my lesson in modding the 33, one of which, BUY JAP RIMS!:cheers:

oh, and thrttle control? whats that? :D

jks

yeah alot of people assume the bigger the tyre the more grip! but as cubes said it's not the case! i don't know if anyone agrees with me but the standard suspension seems to have the most grip off the line! has something to do with weight transfer i think

Edited by nos man

It's a catch 22 sometimes, Squat is good for weight transfer and dampens the initial bang of the driveline, but squat can also induce excessive camber which can leave less tyre off the road. Having softer, larger walled tyres means the tyre doesn't follow the course of the squat as much leaving more tyre on the road. Low pro's are fantastic for the hills for turn in but wack for straight line especially in a 2wd. (as said previously)

yeah alot of people assume the bigger the tyre the more grip! but as cubes said it's not the case! i don't know if anyone agrees with me but the standard suspension seems to have the most grip off the line! has something to do with weight transfer i think

hence why we used to run 90/10 shocks on the front & Mickey Thompsons on the rear for drag racing back in the day

It's a catch 22 sometimes, Squat is good for weight transfer and dampens the initial bang of the driveline, but squat can also induce excessive camber which can leave less tyre off the road. Having softer, larger walled tyres means the tyre doesn't follow the course of the squat as much leaving more tyre on the road. Low pro's are fantastic for the hills for turn in but wack for straight line especially in a 2wd. (as said previously)

yep thats why i have gone to stock wheels but with good tyres, i used to 19's with 265's on the back and they just wouldnt give traction, i have red many of articles in magazines wihch were written by Martin Donnin stating standard suspension is the best for the drag strip, so thats why i have kept mine in so im hoping my new power will be more traction friendly

yep thats why i have gone to stock wheels but with good tyres, i used to 19's with 265's on the back and they just wouldnt give traction, i have red many of articles in magazines wihch were written by Martin Donnin stating standard suspension is the best for the drag strip, so thats why i have kept mine in so im hoping my new power will be more traction friendly

Very much looking forward to seeing your car back on the road when you get back dan.

mm good result!

gotta be happy with that!

fun times ahead!

Yeah thanks car feels excellent, very smooth linear power. Second gets a bit of a skip along when it comes on to boost. :D

Nice...

Now for some cams to pick up ~20-25rwkw on the same boost and then 2-3psi more boost and you should get damn close to cracking 300rwkw. :D

Cheers Cubes.

Nice and safe on the Standard bottom end at the moment. It's good to know theres still more left in it if need be down the track.

Impressive results on a mainline dyno there Lee, you should see 265-270 on a DD machine.

Im going back to the drawing board, Wastegate was WIDE open but still pumping close to 20+psi. So ive decided to Go external Gate modded onto my DMAX manifold so i can regulate boost alot better. I could just wack on a .82 rear with a larger internal gate but i want to retain as much response as i can get my hands on so i'm keeping the .63 with looked fairly responsive and going external gate.

Much appreciated to Martin and Mark for the help. Top Blokes.

EDIT: martin seemed to love my setup, i was a bit unsure about the size of the bastard. :D

Edited by Ryanrb25

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...