Jump to content
SAU Community

Recommended Posts

a couple of weeks ago i was parked outside my bedroom window and at exactly 6am wednesday my alarm went off.

i ran outside naked lol and chased the guy down cross road but lost him in the back streets. when i got back to my car this is what i found :D.

keep in mind these photos where taken after the cops dusted for finger prints.

they bent the steel out on the drivers door handle, damaged the rear left quarter under the window (trying to pop out the window) they also stuck something into the boot lock, then they tried to pop the passanger door handel out and tried sticking something between the door and the panel and tried to bend the door out, and in the end they smashed the passenger window and took off when i came out to kill them. and thanks to pearce crash repairs it only cost me $400 to fix it all cos im to lazy to do it myself.

and the new window came courtesy of Z IMPORTS-wally is the best.

post-55216-1224209588_thumb.jpg

post-55216-1224209609_thumb.jpg

post-55216-1224209630_thumb.jpg

post-55216-1224209648_thumb.jpg

post-55216-1224209676_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/240579-mass-damage-during-break-in/
Share on other sites

that's horrible man, glad it's sorted now though.

By the looks of what they've done though, they can't have been that bright. As trying to pry off a door handle would work to open it, but just take far too long, and they probably would have gone through just as lengthy a process trying to start the car

thats almost exactly like what happened to my car. the tried to pop the rear window out on both sides and ripped my door handle out, bent all the seals etc.

what area was this in? ttg or modbury way?

the cops wouldnt even come out to have a look at my car yet there were finger prints everywhere. your pretty lucky!

sorry to see about your car though!

Similar to what happened to my car once, although its nowhere near as bad as that... seems like someone was trying to pull out the lock with screwdriver... when the alarm went off he ran away and had to settle for the gt badges, lol...

Directed Electronics dual zone motion sensor ftw. Stops scums before they even try to do any shit to your car.

yeah those were some dumb ass criminals, trying to steal a car that was only 5 metres from where you were sleeping! :D

yeah there are some stuipid people in adelaide ive heard of this guy called dr_hoon45 lol hi chris long time no see

thats almost exactly like what happened to my car. the tried to pop the rear window out on both sides and ripped my door handle out, bent all the seals etc.

what area was this in? ttg or modbury way?

the cops wouldnt even come out to have a look at my car yet there were finger prints everywhere. your pretty lucky!

sorry to see about your car though!

nah im down in edwardstown right near the cross rd and south rd intersection lol great place to do some public nudity and as for howies comment (+1 for shaved door handles?) nah i got it all repaired to standard ill post some pics of it now.

thats almost exactly like what happened to my car. the tried to pop the rear window out on both sides and ripped my door handle out, bent all the seals etc.

what area was this in? ttg or modbury way?

the cops wouldnt even come out to have a look at my car yet there were finger prints everywhere. your pretty lucky!

sorry to see about your car though!

as soon as i read it, thats exactly what i thought too kye :S

glad to hear you got out of it not too bad mate. And lets hope they get whats coming to them soon.

How much that cost you champ?

it only set me back $400 and he even fixed a little dent on the rear right :thumbsup: heres some pics. ill get is sprayed after i throw on a gtr front end

the work that was done included straightening all the primed parts and preping and priming, rebuilding all the locks inlcuding the boot lock (as they were all destroyed internally and i didnt want to have to change the ignition to match the rest), replacing the passanger window which was supplied by wally at Zimports and cleaning all the glass out of the car, all was completed overnight. pearce crash repairs are bloody legends.

post-55216-1224396892_thumb.jpg

post-55216-1224396938_thumb.jpg

post-55216-1224396974_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...