Jump to content
SAU Community

Recommended Posts

Here's a link to Nissan's own page regarding the GTV.

The GTV is basically a R34 GTT, minus the turbo (RB25DE instead of the RB25DET). The GTV has GTT brakes, suspension, HICAS, running gear, etc etc and apparently was the first non-GTR R34 to be made available in Bayside Blue (TV2). Following the release of the GTV, Nissan extended Bayside Blue as a color option on the entire R34 range...

Out of curiousity - Nissan specs mention the GTV has the GTT's "Turbo Floor Stay" Anyone have any idea what the hell that is?:D

Link to comment
https://www.sau.com.au/forums/topic/24104-skyline-pics/#findComment-516202
Share on other sites

Originally posted by Demon Dave

Out of curiousity - Nissan specs mention the GTV has the GTT's "Turbo Floor Stay" Anyone have any idea what the hell that is?:D

Dave, apparently the "floor stay" is an added cross bar or cross member that are put on the turbo cars for added rigidity. It doesn`t specify on that link you gave whethter it`s on the front or rear or both, but I`d put my money on the front. You`ll prolly find an extra cross member under your engine that regular 2.5 GT`s don`t have...

Link to comment
https://www.sau.com.au/forums/topic/24104-skyline-pics/#findComment-516267
Share on other sites

Rezz - thanks for the info about the floorstay!:)

To be honest I wasn't that bothered about the GTV being N/A. It goes pretty well, it was the right price (for my budget at the time) and more importantly the right color (bayside blue)...so I went for it.

Besides, it's only a temporary car till I can get my hands on a R34 GTR in the same color:) I hope!

Link to comment
https://www.sau.com.au/forums/topic/24104-skyline-pics/#findComment-516524
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I saw you mention this earlier and it raised a red flag, but I couldn't believe it was real. Yes, the vacuum signal should vary. It is the one and only load signal from the engine to the ECU, and it MUST vary. It is either not connected or is badly f**ked up in some way.
    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
×
×
  • Create New...