Jump to content
SAU Community

Recommended Posts

Hey guys, I'm pretty new to this forum, although I've had my car for about a year now. It's my first car, although I had to wait an eternity to get it. I got it fresh off the boat from a dealer, had to wait a few weeks for him to get it complied and all. Its a 40th Anniversay R33 GTS-T, but thats about all I know about it. Its got a rear R33 GTR spoiler, but I can't seem to find many other specs on it. It's got an after market Blitz blow off valve, pod filter, and a Nismo 3 inch cat-back as well. I'm getting a GReddy turbo timer installed as I type :P , and as you can see from the pics I got blue LEDs put in near the feet. I plan to keep this car for the longrun, and want to spend money on it on further mods, BUT being a noob, I have no idea. I used to drive my parents tissue-box-on-wheels before this, so I really do not know much about cars, but I'm learning as I go along.

Any help will be greatly appreciated! I also wanna go on skyline runs with you guys!

Hopefully the pics get attached properly, please let me know what you guys think, and any suggestions are welcome.

Cheers!

post-56621-1224888557_thumb.jpg

post-56621-1224888596_thumb.jpg

post-56621-1224888640_thumb.jpg

post-56621-1224888675_thumb.jpg

post-56621-1224888693_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/241636-noob-with-40th-anniv-r33/
Share on other sites

First off welcome :P

As for info on the 40th anniv. model (I've got one myself) apart from the pillar badging, the seat badging and some extra available factory options, they're the same as any other S2 R33 albeit built in 1998 just before the R34's (or very late 97 for some).

As far as mods go, best place to start is always with the exhaust (power wise at least). You already have the cat back, so the next step would be a 3" dump/front pipe and a high flow cat which would complete the exhaust system and give you a nice gain in power.

From there depending on what path you want to take (or take first) you can go with an upgraded intercooler (R34 side mount if you don't plan to go much past 200rwkw, which the stock turbo will do) or a front mount if you plan to go further with an upgraded turbo etc...

There's plenty of mods to get good power, but don't neglect suspension, tires and brakes.

Have a good read through the various sections of the forum, and utilise the search function to find all the info you could ever want on your car and the different ways to go about modifying it :D

Congratulations on the purchase :D

Welcome to the forum mate, I also drive a 40th anniversary but in midnight purple. Your best to search the forums and do some reading on the first mods to do and just rock up to any cruises/meets/dinners in your area.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...