Jump to content
SAU Community

Recommended Posts

Pred,

As I wrote I got my aftermrkt bar (see avatar) from Jetspeed...cheaper than EvoR but fantastic job...paint was matched perfectly and since fitment no stress cracks!

U can contact Jetspeed on: (03) 9548 8828

-ant95GTR

Link to comment
https://www.sau.com.au/forums/topic/24174-front-bars/#findComment-517267
Share on other sites

sweet..thanx heap ant.. I'm really miffed i gotta pay for a new one.. but if i can get it this weekend, get it to Palm, *might* have my car back before the end of the year (note the sarcasm)

I already got the supports and things cut for the GTR bar so hopefully I can just use that again.

Link to comment
https://www.sau.com.au/forums/topic/24174-front-bars/#findComment-517285
Share on other sites

yeah, i ordered some supra pods a few months ago, it took them about 2 weeks, after that long wait the guy goes to me that he ordered R33 ones instead, and that i had to go all the way down there and put a deposit on them on another order which will take at least another week. after that never again

Link to comment
https://www.sau.com.au/forums/topic/24174-front-bars/#findComment-518089
Share on other sites

and another time before this incident i bought a set of rear pods for a 180sx the guy gave me the left hand side which was a damaged repaired one that didn't even come close to fitting on the car (you could see a crack in it and its been plastic welded)and was trying to convince me that the mold is never perfect and that the panel beater where i get it painted will fix it up.

Link to comment
https://www.sau.com.au/forums/topic/24174-front-bars/#findComment-518097
Share on other sites

ok.. suborn bad then :D

I ended up buying a 400R bar mainly due to lack of choice. Jetspeed has reasonable prices. Only problem is their range for GTS-T's. Most of the stuff seems to be for GTR, and requires modifications for the R33 GTS-T... that involves extra time and $ them stuffing around to get it to fit. Unless you're willing to wait a few weeks getting one, obtaining a front bar isn't as easy as it might sound :-|

Otherwise its ship from Sydney or elsewhere and pay ~$600 for a bar, and then maybe $100 getting it shipped to melbourne. Ends up being pretty expensive in the end.

So for the record guys, be careful with your front bars, as major cracks will probably mean you need a whole new bar :D its not cheap.

btw: evo-r doesn't have bodykits as i found out.

Link to comment
https://www.sau.com.au/forums/topic/24174-front-bars/#findComment-518241
Share on other sites

Jetspeed had a similar kit to that Suborn one, i forget what they called it.. but when i saw it on a skyline they had there it didn't look heaps different to the stock. Seeing as i am on tightass and "get whatever i can get straight away" timeframe, I bought the 400R so that is what is going on.. when i get the car back i'll post some pix of how it all looks. Will look a little like this, except my grill will make it all look better :D

ju2_pic1_2.jpg

To be honest I'd just keep bar i had but it woulda taken too much effort to get it to useable state. And all these other bars require mucking around with to get them to fit (so add $200 just to the basic bar price). Basically if you don't have time (and i don't), get something simple :D or even better, if you don't want problems - stick with the current bar. Low as bars are fine for show cars that never get driven, but for a car you drive every day, something *always* happens fo fark them up...

Palm is 242 Centre-Dandenong Rd, Cheltenham.. 9583 4710 but leave 'em alone Dan, coz i want my car finished first..they got too many in there already :(

Link to comment
https://www.sau.com.au/forums/topic/24174-front-bars/#findComment-518799
Share on other sites

Originally posted by predator666

Low as bars are fine for show cars that never get driven, but for a car you drive every day, something *always* happens fo fark them up...

this is why i chopped my stock bar instead of getting a GTR or 400R bar :D

Link to comment
https://www.sau.com.au/forums/topic/24174-front-bars/#findComment-518933
Share on other sites

i like the stock bars better than the 400R i think its a bit much for me...

hehe gords... Go Dan take it down asap!! lol actually i reckon mine will be ready before yours gordo :D he said to come back during the week as they were only waiting on one of the guys to finish the guards (paint stripped and slight repair as i used the wrong filler when i fixed it rofl.) everything else is ready for paint....

oh also i really need to get some mesh (not that fine crap ppl use for hiding the fact the car has no FMIC) the thicker harder stuff with the larger holes u could almost poke a hole thru.

anyone know where i can get some... autobarn had crap and repco had none... need some b4 the bar goes back on.

Link to comment
https://www.sau.com.au/forums/topic/24174-front-bars/#findComment-519040
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...