Jump to content
SAU Community

Recommended Posts

I am moving house and want to get rid if the remaining parts I have left, some aftermarket gear, some '97 R33 series 2 parts (gtst with less than 75,000km)

Buy the lot/in a bundle and save, open to negotiation, all offers considered, if your in SA come pick up a bargain

For any pics please see the link here: http://www.skylinesaustralia.com/forums/R3....html&hl=pt

Razo shift knob $50

Speco boost guage (mechanical with cup holder, silver 52mm, reads to 30psi) $75

Personal brand 320mm steering wheel (no boss kit)

-complete with horn button (carbon centre), black leather wheel very good condition $75neg

R33 gtst PARTS VARIOUS

Tail lights with covers/globes/wiring $80each ($120 pair)

driver or passenger window $50 each (or $80 pair)

Wiper stalk $30

Doors both driver and passenger (no windows/motors/central locking) $70 each

INTERIOR STUFF

Interior cabin carpet (no rips or stains etc) $100

Handbrake lever/mechanism (leather handle good condition, only has the front part of the cable) $50

Scuff panel for door shell (says "SKYLINE") $60pair

Roof lining $50

Interior lights both $20 ($15 each)

Sunvisors EDIT: $20 the pair as I damaged a clip on passenger side

All interior surround plastics with x3 grab handles $120neg

(ie all of rear + A/B pillars...no centre console/dash etc these already sold)

Seat belts with brackets/bolts $180 the lot (or $100 front/$100 rear)

Cluster plastic surround $20

DOOR PARTS

driver's door handle $30

passenger door handle $30

Rubber seals for door shell L&R $50 ($35 each)

Rubber seal for boot shell $20

Door ajar sensors complete $10pair

OTHER STUFF

Rear reo bar (undamaged) $100

Side skirts damaged see pics $40 pair

Tie rod boots (front) $20pair

Brake booster & manual brake pedal/bracket $70

Rear camber arms $30 pair

Rear traction arms $30 pair

Bonnet lining (with all clips/plugs) $75

Front ABS sensors complete L&R $30 pair

Front wiper motor $20

Rad and A/C clamps $10 all 4

Standard clutch cover and organic clutch plate $50

Want ALL of this gear gone, moving house and can't be bothered carting it down

PM or post here for a repsonse

Will consider selling cheaper in bulk so make an offer, take the whole lot mentioned above for $750 if you want

Link to comment
https://www.sau.com.au/forums/topic/241857-cheap-aftermarket-and-r33-parts/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
×
×
  • Create New...