Jump to content
SAU Community

Recommended Posts

hey all got a few parts here that needs to go

all parts are located in SA, prefer pick up only or post within SA only

HKS 2540

post-38352-1225070071_thumb.jpg

very good condition, has a garret compressor housing

to suit RB20/25

asking $900

R32 Greddy Type S coilovers

post-38352-1225070304_thumb.jpg

excellent condition only done 1500km on these, comes with C spanners

asking $1450

RB20DET

engine has done 158,000km always serviced with motul oils and fluids

comes with loom and computer, has braided oil and coolant lines, minus turbo (can arrange standard turbo for extra $) price has been adjusted to suit

asking $1300

RB20 Gearbox

good condition, hasnt been treated harsh rear main seal done about 5000km ago

asking $450

Genuine GTR front bar and front guards

R32 GTR front bar genuine plastic item in painted matte black, good condition $300

R32 GTR front guards, alright condition, very light weight compared to GTST guards $350

can call/sms me on 0431171992

pics will be up on other items tomorrrow

Link to comment
https://www.sau.com.au/forums/topic/241902-r32-parts/
Share on other sites

what engine was the turbo on?

how much power was it making?

when did it hit boost?

how many k's old?

cheers

hey mate the turbo was on a rb20 and it made 200kw on morpowa's dyno running 1 bar boost, wasn't running bigger injectors and only a FMIC and 3inch exhaust

its been a while since i drove the car soo i would say it hit full boost at around 3500-800

the turbo was second hand when i bought it and since i had it has done about 10,000km

Link to comment
https://www.sau.com.au/forums/topic/241902-r32-parts/#findComment-4222319
Share on other sites

Hey man you wouldnt sell those coolant and oil lines would you?

Im after some RB20 parts,

* turbo coolant line that goes around the head.

*ECU temp sender, big yellow one

*turbo to mani nuts

Link to comment
https://www.sau.com.au/forums/topic/241902-r32-parts/#findComment-4231227
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...