Jump to content
SAU Community

Recommended Posts

All too rarely, airline attendants make an effort to make the in-flight "safety lecture", and their other announcements a bit more entertaining.

Here are some real examples that have been heard or

reported:

1. On a Continental Flight with a very "senior" flight attendant

crew, the pilot said, "Ladies and gentlemen, we've reached

cruising altitude and will be turning down the cabin lights. This is for

your comfort, and to enhance the appearance of your flight

attendants."

2. On landing the stewardess said, "There may be 50 ways to leave

your lover, but there are only 4 ways out off this airplane."

3. As the plane landed and was coming to a stop at Washington

National, a lone voice came over the loudspeaker: "Whoa, big fella.

WHOA!"

4. After a particularly rough landing during thunderstorms in

Memphis, a flight attendant on a Northwest flight announced, "Please

take care when opening the overhead compartments because, after a

landing like that, sure as hell everything has shifted."

5. "In the event of a sudden loss of cabin pressure, masks will

descend from the ceiling. Stop screaming, grab the mask, and pull

it over your face. If you have a small child traveling with you,

secure your mask before assisting with theirs. If you are traveling with

more than one small child, pick your favorite."

Link to comment
https://www.sau.com.au/forums/topic/242623-jokes/page/10/#findComment-5144151
Share on other sites

Hey guys got some abo jokes for ya. :ermm:

Whats faster than a aboriginal with a plasma TV............. His brother out the front with the DVD player.

What do u do when you see a aboriginal.......... Stop laughing and reload.

There's to aboriginals in a car who's driving............... The police.

How do you stop a aboriginal from drowning........... Take your foot off his head.

What do you call a bus load of aboriginals driving off a cliff.............. A start.

What is the difference between a aboriginal and a park bench............... The bench can support a family.

Link to comment
https://www.sau.com.au/forums/topic/242623-jokes/page/10/#findComment-5145675
Share on other sites

hey guys i got some woman jokes for ya enjoy!! :ermm:

How many man does it take to open a beer.......... None it should be open when she gives it to you.

Why do woman have such small feet............. So they can get closer to the sink.

Why did the woman cross the road............... she shouldn't have she should be washing the dishes.

What do woman and tornado's have in common............... they blow they suck then take ya house.

Link to comment
https://www.sau.com.au/forums/topic/242623-jokes/page/10/#findComment-5145687
Share on other sites

Dear People of Australia ,

Due to the current financial situation caused by the slowdown of the

Economy, your Government has decided to implement a scheme to put

Workers 50 years of age and older on early retirement. This scheme

Will be known as RAPE (Retire Aged People Early).

Persons selected to be RAPED can apply to the government to be eligible

For the SHAFT scheme (Special Help After Forced Termination).

Persons who have been RAPED and SHAFTED will be reviewed under the

SCREW program (Scheme Covering Retired Early Workers). A person may be

RAPED once, SHAFTED twice and SCREWED as many times as the government

Deems appropriate.

Only persons who have been RAPED can get AIDS (Additional Income for

Dependants & Spouse) or HERPES (Half Earnings for Retired Personnel

Early Severance). Obviously, persons who have AIDS or HERPES will not

Be SHAFTED or SCREWED any further by the government..

Persons who are not RAPED and are staying on, will receive as much SHIT

(Special High Intensity Training) as possible. The government

Has always prided itself in the amount of SHIT it gives out. Should

You feel that you do not receive enough SHIT, please bring this to the

Attention of your local MP. They have been trained to give you all the

SHIT you can handle.

Sincerely,

Kevin Rudd

Canberra

Link to comment
https://www.sau.com.au/forums/topic/242623-jokes/page/10/#findComment-5148761
Share on other sites

  • 3 months later...

Why Men Have Better Friends

Women's Friends: A woman didn't come home one night. The next day she told her husband that she had slept over at a friend's house. The husband called his wife's ten best friends. None of them had seen her or knew what he was talking about.

Men's Friends: A man didn't come home one night. The next day he told his wife that he had slept over at a friend's house. The wife called her husband's 10 best friends. Eight of them confirmed that he had slept over, and two claimed that he was still there.

Link to comment
https://www.sau.com.au/forums/topic/242623-jokes/page/10/#findComment-5364057
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
    • Sorry, just assumed that talk of coloured pads meant EBC red/green/yellow/shit stuff. I don't know the DBA pads, but it's a reasonable bet that they will be OK. DBA make good stuff generally. Those 4000 series rotors I linked to are very good. I may well replace the RDA rotors I have with those when required.
    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
×
×
  • Create New...