Jump to content
SAU Community

Recommended Posts

Okay, so I've found myself in a bit of a situation. My wedding is coming up soon which means I'll be able to put money aside for other (car related) things again soon. I've got an (almost) stock R33 GTST at the moment and was going to drop a few grand on it after the wedding... then I saw how cheap the R33 GTRs are getting nowadays; they're down to what the 32s were a couple of years ago.

So here's my dialema:

Upgrade the GTST / Just cave and get a GTR

Here's my thinking at the moment:

- It would be cheaper and quicker to drop $5,000 - $10,000 on my GTST for a bit of added fun and some very reasonable rwkw

- The GTR has more tuning potential (?)

- Four wheel drive is a massive bonus

- It would be sweet to have a GTR

- The R33 is my favourite shape and I like the interior: the GTR will be almost the same inside

- My current car is an auto (which has its pros and cons, not the least of which is that the missus doesn't have a manual license)

- Petrol on the GTR will be more pricey (is it really if you just drive normally?)

- I might have trouble selling my current car in this economic climate (because it's a guzzler?)

- I'd need to get a loan to buy a GTR - not so to mod my current car.

Can anyone add anything to this or has anyone here upgraded from a GTST to a GTR?

Thanks guys!

Edited by diamondjo
Link to comment
https://www.sau.com.au/forums/topic/242783-mod-the-gtst-or-buy-a-gtr/
Share on other sites

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

Hey Justa. I was thinking around the 300 mark which seems a fairly reasonable expectation for my car and a goal for a lot of people; although I can't remember reading of any auto's pulling that much - do you think the tranny would hold up?

I would mod the GTR eventually of course, but not right away; I'd need to pay off a bit of the loan first. What a stock GTR has over a GTST of equivelant horse-power is handling and that second turbo providing some extra help at the bottom end.

dont know if an auto can handle that much power.

I would probably go test drive a gtr and see if you like it that much more than a gtst

Thanks Terence, yeah I was thinking that myself, I'm a little hesitant to throw too much HP at the auto tranny because I don't know what it's actually capable of... I mean, I could go for a manual conversion but... sigh.. why bother?

I'd actually like to take a GTR for a spin and see what I think. Does anyone know how I'd go about doing this without wasting anyone's time? I don't want to go into a dealership and test a car when I'm not actually interested in buying at that point.

I'm sure someone would be willing to take you for a drive in there R33 GTR, but doubt they'll hand over the keys :D

Ha, yeah I wouldn't be surprised if I couldn't drive it ;). Maybe I'll ask around here after the wedding and see if anyone would be willing to take me out.

Do up the gtst i rekon.. buy injectors / fuel pump / SAFC / boost controller / catback exhaust / fmic / bov / thats all ya need mate.. seing as tho ur lady cant drive a manual it sounds like the best way.. unless u wana be selfish and say nup ur walking lol :D in comes the GTR haha .. OH yer and tune it all up ull get alot more HP then stock

Edited by zonk

Hmmm, selling the gtst was always on my mind if I was to get a GTR but I'd need to get a loan to hold me over until I can find a buyer. I notice that daineisdabomb is selling his gtst and it looks like an awesome piece of work! If it's still for sale after the wedding I'll certainly consider making him and offer. But you're right, a worked gtst is also an option.

http://www.skylinesaustralia.com/forums/an...le-t241223.html

since your is pretty much dead stock and you dont seem to be attached to it i would sell it and buy a gtr. I am sort of in the same situation but i have come to far with the gtst to stop now i just need the bigger turbo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...