Jump to content
SAU Community

Recommended Posts

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

its actually Chris Milton of adelaide engine developments, and yes he has just meta-laxed an n1 block and heads, pistons ,rods etc? for me and assembled it to formula1 tolerances, and he has told me i can rev it to 11000rpm it is an rb26 still and produce around 1100hp. all was rather cheap as i am good friends with his son Sam.below is a photo

oh the spl t51 should be ok or i may have to look at a t88 but i dont want too much lag.,.....

i wholly recommend chris milton as an engine builder

post-23901-1226304876_thumb.jpg

chris and sam know their shit, they just finished my N1 motor, good for 1100kw.

thats a s#&tload of grunt! Is it for track, drag or.......... street?? :P

on a side note, i'm aiming for a reliable 600-700hp

I was planning on using the tomei sump baffle kit, wanting the best protection for the motor.

I've read on here that some members use an extended sump with baffles, should I be doing the same ? Or is this just overkill?

thats a s#&tload of grunt! Is it for track, drag or.......... street?? :P

on a side note, i'm aiming for a reliable 600-700hp

I was planning on using the tomei sump baffle kit, wanting the best protection for the motor.

I've read on here that some members use an extended sump with baffles, should I be doing the same ? Or is this just overkill?

no definately go the baffle and also get a tomei oil restrictor fitted to the block just some extra insurance rb's dont EVER like being starved of bearing oil. they hold alot of oil in the heads when revved hard.

its actually Chris Milton of adelaide engine developments, and yes he has just meta-laxed an n1 block and heads, pistons ,rods etc? for me and assembled it to formula1 tolerances, and he has told me i can rev it to 11000rpm it is an rb26 still and produce around 1100hp. all was rather cheap as i am good friends with his son Sam.below is a photo

oh the spl t51 should be ok or i may have to look at a t88 but i dont want too much lag.,.....

i wholly recommend chris milton as an engine builder

F1's rev to 20,000 rpm.

51's will still have plenty of lag on a 2.6.........did you consider going 2.8 or even 3.0 litre, more cubes = less lag.

what bottom end and sump setup you running that can handle 1500hp?

F1's rev to 20,000 rpm.

51's will still have plenty of lag on a 2.6.........did you consider going 2.8 or even 3.0 litre, more cubes = less lag.

what bottom end and sump setup you running that can handle 1500hp?

yes i did consider an rb30 but i want it to scream, i will most probably settle for a Garrett 3037 pro(No smaller) thats about 800hp with 80mm gates ,my r34 gtr has hks gt-rs' and that pulled 343kw on willal's dyno but i cant rev it too hard 8500rpm on standard motor with 270 cams and injectors, power fc and boost kit with z32 Afm's . with my 32gtr I want heaps of mid range all the way to 11grand, i wonder what that will feel like on mallala's twisty turn 1. in a 1200kg r32 GTR, i spose the motor might last a little while longer with less power ,but you're right the 51's will be lag monsters, its really a tough choice, any suggestions?

dry sump for sure.

Edited by ax53b70p25
yes i did consider an rb30 but i want it to scream, i will most probably settle for a Garrett 3037 pro(No smaller) thats about 800hp with 80mm gates ,my r34 gtr has hks gt-rs' and that pulled 343kw on willal's dyno but i cant rev it too hard 8500rpm on standard motor with 270 cams and injectors, power fc and boost kit with z32 Afm's . with my 32gtr I want heaps of mid range all the way to 11grand, i wonder what that will feel like on mallala's twisty turn 1. in a 1200kg r32 GTR, i spose the motor might last a little while longer with less power ,but you're right the 51's will be lag monsters, its really a tough choice, any suggestions?

dry sump for sure.

yep, check this............unless you're interested in straight out drag racing alone, this may be a better solution for the street over a 51 or especially an 88, lol

Monster Twin Setup

thanks, will call them monday.

Not sure, but some quotes i've been given were astronomical!

What price is astronomical?? Has the engine actually given up yet...

Also consider putting a sump baffle in and the oil restictor in the head like the others said.

Have they told you what brand bearings,pistons,rods they like to use in the quotes?

I would source all your own parts like dangerman 4 said..and would want to see them going in the engine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
×
×
  • Create New...