Jump to content
SAU Community

Recommended Posts

OK, i seem to buy more than fix, and with my latest acquisition i cant keep some of the older stuff..

so i'm selling the 30...some of the longer term members in perth may recall this being my first cruise car...

'84 HR30 sedan with the L20-T engine.. blue with crap paint..crap interior.. flat batt...leaking rad.....but still mech ok..only parked it up due to it running out of rego when i got the white granny spec going....had all the brakes done shortly before coming off the road..would be easy to re-do for rego or make into drift/khana car.. spare L24 engine to go with it

HR30001.jpgHR30002.jpg

IMAGE0018update.jpg

L20T.jpg

$500

(also advertised on R31 club site)

email--- dodgsun(at)yahoo(dot)com

also a datto 1200 coupe drag shell too for sale :(

Edited by dodgsun
Link to comment
https://www.sau.com.au/forums/topic/242902-fs-hr30-sedan-l20t/
Share on other sites

Hi Dodgsun, Does this have disc rear end and what diff ratio is it. Also is it man or auto? I've read this stuff bolts straight up to the C210, but would like to know for sure. What's the all round suspension like as mine needs front and back replaced. Ricky

yes to all. hehe...yes rear is disk...not sure on the ratio...tis a 5sp, suspension is pretty standard, but better than the aussie version..you gonna use it for parts eh!

turbo the L28!!!!!!

Edited by dodgsun

WOAH!

finally a HR that is priced for its condition!

mate if i was in your area it would be on the trailer tonight....

BUT all I woudl do is strip it and store the shell & the good bits for a rainy day.

SO.... if you are going to strip it, I will give you $100 for the loom & sensors attached (the knock, head temp, water temp x 2, oil pressure,o2 in the dump pipe etc)

IM DESPARATLY NEEDING THEM (pretty much all that is holding me back from finishing mine..... whens the last half decent L24et you saw!!)

you could get good penny for the manifolds and sump, afm, dissy, oil pump,

con rods (send em to a dat builder for their stroked Z18et setups)

the rear glass for import is RARE

Diff and shafts are good for the 1600 boys too ,

front strut assemblies are a winner, as the R32 brakes bolt onto them... fken i should buy them off ya too if the price is right.

the 'skyline' rear boot trim... well pm dennis to let him know its available, if he dont want it, I'll take that too

also interested in the oil lines for the turbo.

pipes from turbo to throttle body

so... you should be able to make more than the $500 your asking in parts alone,

I have a few hundred here for the bits highlited in bold text, let me know ASAP if your interested

if you are, strip the bits and get me size & weights of the packages and i will get a quote with 'busfreight' and youe have cash in the bank and i will be boosting around in my '80s cruiser

8 weeks till im out of work, then off to the army so im on this like a rash

Hi,

I'm also interested in some of the turbo bits,

oil line to and from the turbo (including banjo bolts), the 'T' piece at the engine block that connects the oil line and oil sender,

I would like the sump, as long as the oil storage part is at the front, but I would think freight would to to much to ship it to Tassie..

Nigel

thanks guys.... but i want to sell it as a complete goer...i have no room for takin it all apart. 9 cars does take up a fair chunk of the backyard. (and im renting)

so the first peep to buy it as a complete car get the prize!!!!...(I'll probably regret selling this i'm sure..but with the 31 and a dodge and the volksrod..that should keep me entertained for a while)

What's your plan Mag86. I'm in W.A and I've been mulling the idea of purchasing this car over and over. Timing is the problem as I'm spending money on overriders($500) new leads $80 and would like to do suspension. I dont want any engine parts ,only rear end stuff ( disc brake set up) By the way what diff gearing do these cars have? Basically it has to be worth my while, it's also all the time it takes stripping out parts.

Dodgsun, what condition are the springs and shocks, back and front, any idea?

ricky if you get it you'll MAKE money in parts....

The rear diff is a R180, some are 3.9 some are 4.1 and some i think are 3.44

the front shockies can take R32/33 2 pot calipers, springs are stiffer than the aussie ones

there are a few guys out there after turbo bits, like manifolds etc

i know noddle in tassie is keen,

im real keen on the heap of stuff i mentioned before, apart forn the shockers ( im only gonna run 5 to 6 psi in an auto, so its aint gonna be a rocket needing race brakes)

wouldnt mind the grille badge too

I have a few hundred left for exhaust and dump, and the bits from this car. so just subtract $200 from the $500 and you get a near complete HR30 for $300... which is almost the bargain of the century (outatime got a DR 2 door for similar price i think?)

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...