Jump to content
SAU Community

Recommended Posts

OK, i seem to buy more than fix, and with my latest acquisition i cant keep some of the older stuff..

so i'm selling the 30...some of the longer term members in perth may recall this being my first cruise car...

'84 HR30 sedan with the L20-T engine.. blue with crap paint..crap interior.. flat batt...leaking rad.....but still mech ok..only parked it up due to it running out of rego when i got the white granny spec going....had all the brakes done shortly before coming off the road..would be easy to re-do for rego or make into drift/khana car.. spare L24 engine to go with it

HR30001.jpgHR30002.jpg

IMAGE0018update.jpg

L20T.jpg

$500

(also advertised on R31 club site)

email--- dodgsun(at)yahoo(dot)com

also a datto 1200 coupe drag shell too for sale :(

Edited by dodgsun
Link to comment
https://www.sau.com.au/forums/topic/242902-fs-hr30-sedan-l20t/
Share on other sites

Hi Dodgsun, Does this have disc rear end and what diff ratio is it. Also is it man or auto? I've read this stuff bolts straight up to the C210, but would like to know for sure. What's the all round suspension like as mine needs front and back replaced. Ricky

yes to all. hehe...yes rear is disk...not sure on the ratio...tis a 5sp, suspension is pretty standard, but better than the aussie version..you gonna use it for parts eh!

turbo the L28!!!!!!

Edited by dodgsun

WOAH!

finally a HR that is priced for its condition!

mate if i was in your area it would be on the trailer tonight....

BUT all I woudl do is strip it and store the shell & the good bits for a rainy day.

SO.... if you are going to strip it, I will give you $100 for the loom & sensors attached (the knock, head temp, water temp x 2, oil pressure,o2 in the dump pipe etc)

IM DESPARATLY NEEDING THEM (pretty much all that is holding me back from finishing mine..... whens the last half decent L24et you saw!!)

you could get good penny for the manifolds and sump, afm, dissy, oil pump,

con rods (send em to a dat builder for their stroked Z18et setups)

the rear glass for import is RARE

Diff and shafts are good for the 1600 boys too ,

front strut assemblies are a winner, as the R32 brakes bolt onto them... fken i should buy them off ya too if the price is right.

the 'skyline' rear boot trim... well pm dennis to let him know its available, if he dont want it, I'll take that too

also interested in the oil lines for the turbo.

pipes from turbo to throttle body

so... you should be able to make more than the $500 your asking in parts alone,

I have a few hundred here for the bits highlited in bold text, let me know ASAP if your interested

if you are, strip the bits and get me size & weights of the packages and i will get a quote with 'busfreight' and youe have cash in the bank and i will be boosting around in my '80s cruiser

8 weeks till im out of work, then off to the army so im on this like a rash

Hi,

I'm also interested in some of the turbo bits,

oil line to and from the turbo (including banjo bolts), the 'T' piece at the engine block that connects the oil line and oil sender,

I would like the sump, as long as the oil storage part is at the front, but I would think freight would to to much to ship it to Tassie..

Nigel

thanks guys.... but i want to sell it as a complete goer...i have no room for takin it all apart. 9 cars does take up a fair chunk of the backyard. (and im renting)

so the first peep to buy it as a complete car get the prize!!!!...(I'll probably regret selling this i'm sure..but with the 31 and a dodge and the volksrod..that should keep me entertained for a while)

What's your plan Mag86. I'm in W.A and I've been mulling the idea of purchasing this car over and over. Timing is the problem as I'm spending money on overriders($500) new leads $80 and would like to do suspension. I dont want any engine parts ,only rear end stuff ( disc brake set up) By the way what diff gearing do these cars have? Basically it has to be worth my while, it's also all the time it takes stripping out parts.

Dodgsun, what condition are the springs and shocks, back and front, any idea?

ricky if you get it you'll MAKE money in parts....

The rear diff is a R180, some are 3.9 some are 4.1 and some i think are 3.44

the front shockies can take R32/33 2 pot calipers, springs are stiffer than the aussie ones

there are a few guys out there after turbo bits, like manifolds etc

i know noddle in tassie is keen,

im real keen on the heap of stuff i mentioned before, apart forn the shockers ( im only gonna run 5 to 6 psi in an auto, so its aint gonna be a rocket needing race brakes)

wouldnt mind the grille badge too

I have a few hundred left for exhaust and dump, and the bits from this car. so just subtract $200 from the $500 and you get a near complete HR30 for $300... which is almost the bargain of the century (outatime got a DR 2 door for similar price i think?)

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
×
×
  • Create New...