Jump to content
SAU Community

Recommended Posts

if its miniture just touch it up...

if its major then you really HAVE to paint the entire panel to make it look stock. (panel doesn't mean the entire side of the car, maybe just the door, or just the front guard etc...)

probably about $100 - 150 per panel

A GOOD paint shop will charge around $300 for a panel or front/rear bar. This includes blending the paint into the adjacent panels. You can probably get a quick respray for less but you will probably notice the difference in colour.

You can try one of those scratch repair places, but in my experience they will only touch non-metallic colours, because they can't get the touch-up paint to blend properly on metallic paint.

You can also touch it up yourself, which I've done on mine for a couple of scratches it's picked up. It's easily noticable if you look at them, but if you just look at the car overall your eyes don't get drawn towards them and you can't really notice.

I got a bit of leftover paint from my respray. It's not proper touch up paint, and as such I can't use that Langka stuff to rub it back with. I just dabbed some on, let it dry, then dabbed a bit more on, etc. It's now almost flush and so harder to notice. But because it's metallic, it'd be noticable even if I did get it flush.

If you want proper touch up paint, try the various auto parts shops. You might need the paint code off your car, or maybe just telling them it's a silver Skyline might be enough for them to find the right one.

Originally posted by JimX

A GOOD paint shop will charge around $300 for a panel or front/rear bar. This includes blending the paint into the adjacent panels.  

Can you still notice the difference in colour for blending the paint?

and how much for respray in white?(milk white???i dont know the term)

A full respray is usually around $3000 or so. More if you want funky colours (pearl etc) or a more than average amount of coats.

I've had experience of a well-done paint blend on my previous car, and I have to say that YOU will notice it, but no one else will until you point it out :( The paint in the resprayed area just looks a little darker/newer, but unless you are very carefully looking for it, you won't notice it.

At one point I managed to dent the rear passenger door fairly badly, and I replaced it with one from a wrecker of the same colour without respraying it. The guy that bought the car looked the car over very carefully but didn't notice the colour change from either the paint blend OR the door change, even though to me both stuck out like a sore thumb.

BG Automotive at Meadowbank is where I got my Skyline resprayed after I got rear-ended. Phone number 9807 6502 or 0414 842 652. I think it should usually be done in around 2 weeks or less.

The place I got my Commodore done at is out of business, but he was also quite good.

padboy if u want to get the right colour paint for ur car go to vg paints at girraween . u need to take with u the colour code ( u 'll find on the cars id plate under the bonnet ) and ur fuel filler door , ask for acrylic paint they will mix the paint for u and for a small fee will match it as well ( i/2 lt mix and match silver is $25 - 30 ) u can use the paint to touch up u r scratches and stone chips . if u want to paint a panel if u never done it before dont try u will stuff it up .

jimx when a pro paints a panel and blends ( u can only blend metalic paint ) u should never notice the diff in the colour if u do its not a good job , i have done plenty and u can never see the diff but metalic paint u have to blend and then u give it a coat of clear to cover the whole panel .

when it comes to painting i/4 panels is more difficult cause u cant paint the whole panel u have to blow it off in to the edge of the roof and as the paint gets a bit old u 'll see where they blow it off , if u try to buf it there it will get worse the more u buf the more u 'll see it . the guys that do touch up jobs its crap u try to polish there and u'll see an edge the more u polish the worse it gets thats why u paint full panels thats the proper way of doing it

touching up is like cheating if u want to sell the car .

Originally posted by wrxhoon

jimx when a pro paints a panel and blends ( u can only blend metalic paint ) u should never notice the diff in the colour if u do its not a good job , i have done plenty and u can never see the diff but metalic paint u have to blend and then u give it a coat of clear to cover the whole panel .

The thing is a keen eye can always spot the difference between old and new paint. Even if it's the exact same colour, you'll never get it perfect. I can always spot resprayed panels, unless the old paint was only like 1-2 years old. The old paint on my Commodore was 5 or 6 years old, and there's no way to get new paint to look the exact same as paint that old. If nothing else it was the only panel without any stone chips on it :(

Like I said, the guy that bought my car looked over it very very carefully from all angles in broad daylight and he couldn't tell. It's probably just one of those things where if you know it's there, you can tell, but if you don't, you can't.

padboy by all means buy the paint to do small touch ups with a very fine brush , u will always see it though but better than having the chips or a small scratch there .

if u wnt a proper job done take it to a pro ( unless u done it before ) and have the whole panel pained , i hope that clears this up for u .

jimx a good painter will match the paint to the old one it doent matter of the age . its not going to be the same colour thats why u blend it in . iven if its the same paint u put on the car the day before and another person paints the panel next to it with that same paint chances are that it will be diff ( like darker or lighter ) the diff u'll see where the panels join.thats the reason when u repair the whole say front door u blend in the rear door and the guard . so u paint full colout the repaired door then full colour the front guard near where the door joins and as u go forward the u put less paint until at the end and near the bonnet no paint at all . u do the same with the rear door then u put a clear coat on the 2 doors and the guard . if the colour was close u can never see the diff as it is blende in with the original paint , got it ?

believe me i have done plenty of them , metalics are easy to match cause u can blend u cant do that with solid colous though .

  • 2 weeks later...

just respray the full panel. but dont do what i did and then scratch it on the side of your house a week later and have to do it again. my mate is a panel beater so its cheap for me but twice in one week is still not cool. about $100 a pop (normally $200 for a door).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...