Jump to content
SAU Community

The Super Easy Boost Mod. Did I Get It Wrong?

zoomzoom

By zoomzoom,
in Four Door Family & Wagoneers

 Share

Recommended Posts

zoomzoom Mentor

zoomzoom

Posted
Posted (edited)

OK so i ive removed the boost solenoid from the wastegate setup and my setup is now as follows

.............................................(T-connector)

(Post-intercooler pipe) ========+=========------->(wastegate)

.................................................||

.................................................||

.................................................||

.................................................( ) <--Restrictor

.................................................||

.................................................||

.................................................||

.................................................||

.................................................\/

.................................(Pipe back to turbo inlet)

Ok so my understanding is that the wastegate spring opens at 5 psi. therefore with my setup the line with the restrictor should bypass some pressure, keeping the wastegate shut past 5 psi and creating more boost.

however the turbo is not going past 0.4 bar or around 5.8 psi. ive drilled the restrictor to over 2.6mm and its still not giving any more than 0.4 bar. i dont get that, the line should be bleeding off plenty of pressure by now. in fact id expect it to be over boosting, but its not giving me anymore. WTF?

can someone shed some light here? am i boost-tarded or missing something here?

Edited by zoomzoom
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted
OK so i ive removed the boost solenoid from the wastegate setup and my setup is now as follows

.............................................(T-connector)

(Post-intercooler pipe) ========+=========------->(wastegate)

.................................................||

.................................................||

.................................................||

.................................................( ) <--Restrictor

.................................................||

.................................................||

.................................................||

.................................................||

.................................................\/

.................................(Pipe back to turbo inlet)

Ok so my understanding is that the wastegate spring opens at 5 psi. therefore with my setup the line with the restrictor should bypass some pressure, keeping the wastegate shut past 5 psi and creating more boost.

however the turbo is not going past 0.4 bar or around 5.8 psi. ive drilled the restrictor to over 2.6mm and its still not giving any more than 0.4 bar. i dont get that, the line should be bleeding off plenty of pressure by now. in fact id expect it to be over boosting, but its not giving me anymore. WTF?

can someone shed some light here? am i boost-tarded or missing something here?

Your diagram is correct so if you have connected from the intercooler pipe to the actuator with a bleed going back to the bov return pipe then I would expect better than 0.4 bar. Is this true all the way to 7000rpm? i.e. does it not increase with high revs? You could try a simple experiment - pull the hose off the actuator and try it carefully at first and then with more and more and see if your boost goes up. If it doesn't then you have to find out why - turbo no good, intercooler leaking, hoses leaking wastegate stuck open? If the boost does go up with the actuator disconnected then maybe the actuator (spring) is stuffed.

zoomzoom Mentor

zoomzoom

Posted
  • Author
Posted

ok i had a good chance to test it today. i took the bypass restrictor off, so it should have been keeping the wastegate closed the whole time, yet it would not boost past 0.5bar

i sure hope it wasnt a pressure leak in the intake because that would have spun the turbo very fast :)

so, where am i left now, how do i go about testing the turbo? shaft play?

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted
ok i had a good chance to test it today. i took the bypass restrictor off, so it should have been keeping the wastegate closed the whole time, yet it would not boost past 0.5bar

i sure hope it wasnt a pressure leak in the intake because that would have spun the turbo very fast :bomb_ie:

so, where am i left now, how do i go about testing the turbo? shaft play?

Did you try pulling the hose off the actuator (and perhaps plugging all the hoses)?

If you get stuff all boost then check for leaks and unless anyone has a better idea it may be turbo off time. Or see if the actuator is stuck.

zoomzoom Mentor

zoomzoom

Posted
  • Author
Posted

bad news im starting to think.

i havent noticed before but i found black oil dripping from the rubber coupling on the air intake just before the throttle body. its dripped onto the cam cover

post-46287-1225867697_thumb.jpg

excess oil in the intake? bad turbo seals? i not sure if the turbo is bad, ive never seen smoke on startup

RBPOWA-(TJ) Grand Master

RBPOWA-(TJ)

Posted
Posted

dont mean to alarm you, but i think there was a thread somewere recent with the same kinda oil leak, think it came down to turbo is near its due date :S

found that link http://www.skylinesaustralia.com/forums/Oi...er-t242873.html

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Bwagz
      Engine model

      By Bwagz · Posted

      Thanks for that, hadn’t used my brain enough to think about that. 
    • MBS206
      R33 GTR running -9 with no tune

      By MBS206 · Posted

      Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Piggaz
      Garrett G Series

      By Piggaz · Posted

      Any G40/1000 or G40/1250 results out there?  
    • joshuaho96
      R33 GTR running -9 with no tune

      By joshuaho96 · Posted

      You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...