Jump to content
SAU Community

Misfire

LotusGTR

By LotusGTR,
in Engines & Forced Induction

 Share

Recommended Posts

LotusGTR Veteran

LotusGTR

Posted
Posted

Got a misfire. It's most noticeable in 2nd under full throttle and it starts misfiring at about 5500rpm. In 4th at about 5000 rpm full throttle. I'm guessing it's coilpacks. In all other regards she's running fine. I'm sure other gears too but these are the stand out occasions.

Is this likely?

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/243300-misfire/
Share on other sites
DAS KAMU Veteran

DAS KAMU

Posted
Posted
Got a misfire. It's most noticeable in 2nd under full throttle and it starts misfiring at about 5500rpm. In 4th at about 5000 rpm full throttle. I'm guessing it's coilpacks. In all other regards she's running fine. I'm sure other gears too but these are the stand out occasions.

Is this likely?

Cheers.

i had the same thing last week

Got some splitfires

put em in and problem gone

hope it all works out

Link to comment
https://www.sau.com.au/forums/topic/243300-misfire/#findComment-4240487
Share on other sites
LotusGTR Veteran

LotusGTR

Posted
  • Author
Posted
ANother vote for splitfires, had the same thing happen to mine

PS, hows your gearbox? You got the one from Sydney yeah?

Sounds like the coils then.....I think they're now $625ish. Nissan wants $1,200....

Gearbox is OK. Bit of bearing noise and 2nd synchro could be better. Long way better than my old one, but I'm still looking for the gearbox holy grail.

Link to comment
https://www.sau.com.au/forums/topic/243300-misfire/#findComment-4241367
Share on other sites
LotusGTR Veteran

LotusGTR

Posted
  • Author
Posted
Id check to make sure 110% though before buying.

Simply swap over with someone's who you know works.

You can use mine if you want, they are near new splitfires.

A kind offer. You're quite right as I'm only guessing it's the CPs. Drop me a PM with your number and I'll call to arrange?

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/243300-misfire/#findComment-4242240
Share on other sites
N1GTR Grand Master

N1GTR

Posted
Posted
Sounds like the coils then.....I think they're now $625ish. Nissan wants $1,200....

Gearbox is OK. Bit of bearing noise and 2nd synchro could be better. Long way better than my old one, but I'm still looking for the gearbox holy grail.

Oh i know where that is. Look in my sig

Link to comment
https://www.sau.com.au/forums/topic/243300-misfire/#findComment-4242334
Share on other sites
ashneel Grand Master

ashneel

Posted
Posted

umm instead of buying new coil packs why not just repair them? and when you have cash get splitfires then.

when i had my 33 repaired it then and never had a problem afterwards. mates GTR33 is putting out 270 atw and was getting misfires like you on full woot did a repair and all is well

my current car R34 GTT 240 rwkw also had misfire and 3 hours to repair and its as good as new.

all you need to do is take it out clean it all up then put a nice thick coat of clear nail polish. i did 3 thick coats on mine and took about 3 hours from taking it all out to going for a test drive.

all it is one or more of the coil packs have a fine fine hair line crack on them so on fool woot the sparks archs out of it causing it to misfire.

its very easy to fix and is a cheap alternative while saving up for splitfires.

ta

Ash

Link to comment
https://www.sau.com.au/forums/topic/243300-misfire/#findComment-4244948
Share on other sites
LotusGTR Veteran

LotusGTR

Posted
  • Author
Posted
umm instead of buying new coil packs why not just repair them? and when you have cash get splitfires then.

when i had my 33 repaired it then and never had a problem afterwards. mates GTR33 is putting out 270 atw and was getting misfires like you on full woot did a repair and all is well

my current car R34 GTT 240 rwkw also had misfire and 3 hours to repair and its as good as new.

all you need to do is take it out clean it all up then put a nice thick coat of clear nail polish. i did 3 thick coats on mine and took about 3 hours from taking it all out to going for a test drive.

all it is one or more of the coil packs have a fine fine hair line crack on them so on fool woot the sparks archs out of it causing it to misfire.

its very easy to fix and is a cheap alternative while saving up for splitfires.

ta

Ash

Thanks for your input Ash but I think I'll go for a more robust and permanent solution. The CPs are now 18 years old and I can't be fugged going on my next all too rare drive to miss out on my fun because my....erm....wife's nail varnish didn't do the job. Glad your trick has worked for you though.

Link to comment
https://www.sau.com.au/forums/topic/243300-misfire/#findComment-4245588
Share on other sites
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • Duncan
      M35 Brake caliper replacement

      By Duncan · Posted

      You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
×
×
  • Create New...