Jump to content
SAU Community

Recommended Posts

Hello All,

I just have a quick question, because after going through the search engine it has only expanded my uncertainty...

I am looking at buying a Vl Calais with an rb26dett conversion in it. It is an R33 GTR engine. (not sure whether that would make any difference). Anyway I live in Tasmania and the seller is in Qld. He has been very helpful and seemingly genuine in his comments, giving me any info i want and not needing to think about any answers. So i am not 100% sure but 90% sure that he is telling me the truth about what he is saying, either that or he is an extremely quick thinker....

Now to my question.... He has said that there is a ticking sound coming from the head (he is 99%) sure that its coming from the head. He said that last weekend he has changed the spark plugs which were fouled and the tick is not there on idle, and then it is there through the rev range... I would like some input on what it could be in your opinion. I mean after reading the search engine topics it could be Lifters, valves, and many other things. so i am not after a direct answer. Just if someone has had something like this before...

Also if it was to come from the bottom end... correct me if im wrong but i will be looking at a total rebuild correct????

Any suggestions would be muchly appreciated

I must just also say that i have been told that it is definitely a tick and not a knock...

Kind regards

--Ben

Link to comment
https://www.sau.com.au/forums/topic/243531-ticking-me-off/
Share on other sites

Best thing you can do is get a full mechanical inspection done by a reputable workshop with experience with an RB26.

If the seller is genuine he should have no problem with having to take it to get the car inspected.

Link to comment
https://www.sau.com.au/forums/topic/243531-ticking-me-off/#findComment-4243966
Share on other sites

Hello All,

I just have a quick question, because after going through the search engine it has only expanded my uncertainty...

I am looking at buying a Vl Calais with an rb26dett conversion in it. It is an R33 GTR engine. (not sure whether that would make any difference). Anyway I live in Tasmania and the seller is in Qld. He has been very helpful and seemingly genuine in his comments, giving me any info i want and not needing to think about any answers. So i am not 100% sure but 90% sure that he is telling me the truth about what he is saying, either that or he is an extremely quick thinker....

Now to my question.... He has said that there is a ticking sound coming from the head (he is 99%) sure that its coming from the head. He said that last weekend he has changed the spark plugs which were fouled and the tick is not there on idle, and then it is there through the rev range... I would like some input on what it could be in your opinion. I mean after reading the search engine topics it could be Lifters, valves, and many other things. so i am not after a direct answer. Just if someone has had something like this before...

Also if it was to come from the bottom end... correct me if im wrong but i will be looking at a total rebuild correct????

Any suggestions would be muchly appreciated

I must just also say that i have been told that it is definitely a tick and not a knock...

Kind regards

--Ben

Where is he located? I might be able to organise a visit for a bit of a listen.

Link to comment
https://www.sau.com.au/forums/topic/243531-ticking-me-off/#findComment-4244023
Share on other sites

Best thing you can do is get a full mechanical inspection done by a reputable workshop with experience with an RB26.

If the seller is genuine he should have no problem with having to take it to get the car inspected.

He has absolutely no problem with me doing this... I just dont know anyone in QLD... any suggestions??? i have run up about 5 or 6 mobile mechanics in qld and they all sound pretty hopeless... all of them want to do a full roadworthy inspection and this is something that i dont really want because i know that the car isnt roadworthy, due to no locks and minor things. also in a preview of what a roadworthy inspection consists of 3/4 of it are to do with things other than the engine... i want someone to only focus on the engine. due to the fact that this car i supposed to be for at least the next year....

can anyone suggest someone in QLD that would be good for this?? the car is located in ipswich.... (not sure how far this is fromn bris

Kind regards

--Ben

Link to comment
https://www.sau.com.au/forums/topic/243531-ticking-me-off/#findComment-4244026
Share on other sites

He has absolutely no problem with me doing this... I just dont know anyone in QLD... any suggestions??? i have run up about 5 or 6 mobile mechanics in qld and they all sound pretty hopeless... all of them want to do a full roadworthy inspection and this is something that i dont really want because i know that the car isnt roadworthy, due to no locks and minor things. also in a preview of what a roadworthy inspection consists of 3/4 of it are to do with things other than the engine... i want someone to only focus on the engine. due to the fact that this car i supposed to be for at least the next year....

can anyone suggest someone in QLD that would be good for this?? the car is located in ipswich.... (not sure how far this is fromn bris

Kind regards

--Ben

I'll be in Ipswich on Saturday afternoon/night. Half the skyline QLD club will be around that area too if you want a mass inspection :P

More than happy to have a look on my way through. My number is 0407 111 229

I'm off to work now so won't read any reply til tonight. Cya

Cheers, Daniel

Link to comment
https://www.sau.com.au/forums/topic/243531-ticking-me-off/#findComment-4244042
Share on other sites

I'll be in Ipswich on Saturday afternoon/night. Half the skyline QLD club will be around that area too if you want a mass inspection :teehee:

More than happy to have a look on my way through. My number is 0407 111 229

I'm off to work now so won't read any reply til tonight. Cya

Cheers, Daniel

Dan will be at my place in Ipswich on saturday. He is your man. Hook him up with details and we'll gitrdone dude. :P

Link to comment
https://www.sau.com.au/forums/topic/243531-ticking-me-off/#findComment-4244085
Share on other sites

Dan will be at my place in Ipswich on saturday. He is your man. Hook him up with details and we'll gitrdone dude. :P

Yeah....

I have just spoken to Daniel... I will organise him to have a look at it and will send him the needed info about the car tomorrow.... THANKS DANIEL... when im up i will need your address and set up up with something (a carton or some cash for your trouble)...

I am still open to any suggestions from anyone that wants to post them of what they think it might be....

BIG SMILE :teehee:

Link to comment
https://www.sau.com.au/forums/topic/243531-ticking-me-off/#findComment-4244128
Share on other sites

he runs on scotch :P

Just out of interest what sorta mods has this thing got?

WEll i can only say what i have been told. This is what i believe.

Fuel pump

FMIC

5 core radiator

the fuel rail looks like it has been modified so maybe injectors and fuel rail

the turbos are N1's (i think)

hks air pods

hks AFM's

maybe cams (no idea)

internally i have no idea and the engine has not been taken apart by the current owner so he doesnt know either.

Custom 2 piece tail shaft

vn LSD diff

GTR 32 gearbox (i assume that it is internals in the RB30 box because to the best of my knowledge the bell housing of the GTR's doesnt fit in the vl's transmission tunnel.

That could also mean that it has an aftermarket clutch... maybe...

exhaust 3'

and no after market management system that i am aware of... i must stress that this car is a current project that is not quite finished... so some mods may have been taken off or even not done yet... and this is only what i assume and i do not know if these are all the mods on the car.... hope that this is enough detail :)

other than that

Group A ss wheels

Aero body kit

VS commodore dash - with all aircon and pwer steering working

gauges - tacho - boost - water - oil and something else

racing seats

calais rear seats

thats it

--Ben

Link to comment
https://www.sau.com.au/forums/topic/243531-ticking-me-off/#findComment-4244500
Share on other sites

dunno if you know this but all the rb26 equiped cars ive ever heard all have a little tick in them up top

shims or something?

Yep. In my experience this is the case.

Especially if you've changed your lifters etc.

Link to comment
https://www.sau.com.au/forums/topic/243531-ticking-me-off/#findComment-4244844
Share on other sites

shims should not be noisy. the common ticking noisy in RB26 is injectors. they have very noisy injectors. easy way to test. at idle, give the car a rev and sharply lift of the gas. just as you lift off and as the revs fall the noise should completely stop for a very brief moment (as the injectors all shut for a split second).

as for changing lifters etc... I can't think of any GTR engines off the top of my head who have changed the lifters? why? they are not a service or wear item really and nothing you can really do to upgrade them. they are just a piece of solid metal, like a tiny bucket.

Link to comment
https://www.sau.com.au/forums/topic/243531-ticking-me-off/#findComment-4244872
Share on other sites

only a idea but i heard somewhere that the bigger injectors will sometimes tick when operating?? dont hold me to this!

read the post above yours.

Also, I am fairly sure it will have standard injectors as the factory ECU is still fitted according to this guy

Link to comment
https://www.sau.com.au/forums/topic/243531-ticking-me-off/#findComment-4245325
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...