Jump to content
SAU Community

Recommended Posts

tinkering with the idea of getting a new family car.

the muppet bus is gettting a bit cramped in the back seat for my growing family.

any ideas on a suitable replacement.

anyone driven a legnum?

they look nicer then the volvo, and around the same price.

or its the effort of getting a evo wagon over here and registered, which would cost lots more.

nicer car but lots of coin.

thoughts?

Link to comment
https://www.sau.com.au/forums/topic/243700-whats-the-best-family-wagon/
Share on other sites

  • Replies 90
  • Created
  • Last Reply

Top Posters In This Topic

stagea

easy

come for a ride in mine at xmas time darren, the head will be done and tuned at ~230kw

very very snappy atm with 200kw, im sure the head work with cams and bigger throttle body will be pretty sweet

the stag is my family wagon, cant fit in a r33 so was always keen for the stagea being a nissan gtr fan.

so tuneable, heaps of parts, pretty much like your coupe but 100kw less =)

hell, the m35 stagea's are like plush millionaire's boats (but yet go ok, lol)

very nice for a bit of a upmarket look at budget price ~20k

stagea series 1 for 11k plus 19k mods = better than suby or evo

stagea series 2 for 14k plus 16k mods = beter than suby or evo (my opinion only)

legnum for 14k plus 16k mods = nice squirty wagon Im sure

evo, too much coin

suby, not much wagon space, stagea is a lot bigger

commy, know not much about them, but again a S1 or S2 stagea with mods will be nicer than a evo or commy or suby, and cheaper too

mine is 18k car and 18k mods, (come december head work) and wouldnt have it any other way

THE NEW HOLDEN WAGON LOOKS HOT gotta admit they are pretty nice for wagon =] lol

Sadly I have to agree, the new commo wagon look very nice! or if you have no budget get the Audi they were showing on 5th gear (not sure on the model but it was v10 twin turbo!)

Ryan

What's your budget?

I'm fairly certain you'll be paying double for an EVO wagon what you would a Legnum or a Volvo (Stagea).

Also, what do you want out of it? Nice drive in close to stock form, OR do you want to mod it up like the muppet bus? IF mods are you cup of tea (and it seems they are) then a Stagea has far better aftermarket support.

BUT If you want a far better looking car, that drives nicer, then go the Legnum. 5sp tiptronic auto is much better for pickup than the 4sp for daily duties, and boost is pretty much on tap at 2500 revs to the 7,500 redline. Simple mods such as exhaust, FMIC, boost control, fuel pump and piggy back ECU (such as a haltec) will net you ~200 awkw, and a 13 sec 1/4.

If you want to go beyond this you're looking at new turbo's which require custom manifolds (not done in australia yet), new injectors, fuel pump etc. and full EMS as stock ECU would've pooped it trying to control bigger injectors etc.

So yeah, if you can live with 200awkw and spending only maybe $3k on top of purchase for that, then Legnum is for you :P

Oh, and dont forget that the Legnums also have the same AYC as the Evo V's in all pre-facelift models, and the Type S facelift models. AYC greatly improves handling in the hills etc (I often light up 3 AYC bars on the dash, hehe). Some auto models also have traction control and Active Stability control. Again, great features if the wife is driving, but I tend to turn of TCL when I'm driving :P

We bought the 260 for a family car... and i love it!

Thats what we bought the rex for!! Not bad family cars eh :P

Sadly I have to agree, the new commo wagon look very nice! or if you have no budget get the Audi they were showing on 5th gear (not sure on the model but it was v10 twin turbo!)

Ryan

Have to agree, the new VE wagon looks the goods, so does alot of the current crop (300c) etc etc...If im right they had it on the british version of topgear as well and what a machine!! 570awhp or something in a 5 litre V10 twin turbo with ceramic brakes the works!!! YUM YUM!!!

STAGEA

I picked up a 1800 x 1200 mesh sheeting earlier this week and it fit no problems. Lets see any other family car do that and look good.

enuf said :P

Edited by RubyRS4
Hahah, I'd like to see a ladder strapped to a Stagea roof! That'd be the day.

yeah an electrician uses his stag as a daily ride

use rav4 side length racks, the stagea has 2 lon ways rack runners on the roof, works easy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...