Jump to content
SAU Community

Next Moto Concepts Track Day, Eastern Creek, 2nd October 2003.


Recommended Posts

Hey Guys,

Here we go again.

I will speak to Dave Stone in the next few days to see how many spots he can give us @ $180 (approx) each but again I MUST get deposits off people or there is not going to be spots kept for them.

SO... I need to know expressions of interest soon and deposits ($50) MUST BE IN NO LATER THAN THE 19th of September. I will be in homebush on Sunday morning and at the SAU General Meeting (open to everybody, only members can have a say).

THIS IS NOT AND OFFICIAL SKYLINES AUSTRALIA EVENT.

You will need as usuall.

Full Face helmut

non-flamable Clothing. (Jeans and a cotton longsleve shirt)

Covered shoes.

Road worthy car (Basically just check for oil leaks and if it is regoed you will be fine)

$130 (balance of payment, this is easier if it is cash)

Full tank of fuel... you normally drive about 300kms in a full day at the creek... basing you fuel consumption on my average track consumption of 26L/100kms you can see that I have to head out and fill up between one of the sessions.

Tis a good idea to check all fluid levels and make sure you have at least half your front break pads left. Also advisable to bring a bottle of octaine booster with you.

Cheers,

Dan.

Attendees:

Majanal (Deposit 9/9/03)

Duncan (Deposit 9/9/03)

B-man

Carlo (Deposit 15/9/03)

Bonkers + Jane (deposit 10/9/03)

DoughBoy(morning)/Fatz(arvo) {I'll see if I can get you guys to share a full day as it will be cheaper}

ndr

Dominic (Deposit 15/9/03)

Total = 8

  • Replies 128
  • Created
  • Last Reply

Top Posters In This Topic

Bug has -certainly- got me but im still finishing off my brake repairs:

* Master Cylinder

* Fuel Pump

* "Track" wheels+tyres

...then im back in business so u better watchout for that red GTS-T... in your rear view mirror :P

Originally posted by Duncan

ahh, some members of the team have reappeared :D

Yes Duncan - it would appear that not all of us have the same flexibility with our clients as others. lol

I've got my co-driver back as well.

I'll be in the middle of moving house that week so I think I'll need the time out!

Neil puts hand up,,,I want more,,,. Carlo and Doughboy me thinks if it's $180 it's gotta be a whole day.

Ah Bonkers will be nice to catch up with you again,,,Been a while buddy.

Neil.

Wow... nice to see team track day still has it!

Updated Above.

Carlo,

Tis a full day. (That goes for you two DoughBoy!)

Bonkers,

It will most likely be $180 for the car if your only driving in one session (eg only session B) and $20 for the extra driver. It will be $180 each if your both driving a session each (eg Session A and Session B).

So where is Silver and Dino (I think he is in Paris) and akira and Prank and shit the list goes on!




  • Latest Posts

    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...