Jump to content
SAU Community

Any Looking To Go From Auto To Man

400kw
 Share

Recommended Posts

400kw Collaborator

400kw

Posted
Posted (edited)

Hi guys ,im looking at putting a auto in my r33 gtst in the next few weeks ,just seeing if any one is chasins a man coverstion..it will be every nut and bolt ,tail shaft ,pedal .shifter everything i pull out ..the master cylinder has just been overhauled ..and it comes with a twin plate direct clutch and lighten fly wheel ,done round 5 k ..box has done bout 70 k ..box works fine ,no grinding .no clunks ..the running gear is still in the car ,if any one would like to see how the box is ..im based in townsville .and i will pay freight any where in australia ..looking $3500 for the whole lot price neg ..

Edited by 400kw
Link to comment
https://www.sau.com.au/forums/topic/244280-any-looking-to-go-from-auto-to-man/
Share on other sites
BoostdR Mentor

BoostdR

Posted
Posted (edited)

You wouldn't be interested in a swap for an R33 5speed with lockup...giving 6 ratio's(all GTST's are 4 speed) Auto with High stall? The 5 speed gives power band everywere unlike the 4 speed. Fuel econ is also improved. Has been build by MV Automatics, Kevlar clutches, Modified Valve body and Larger Valves. Its an absolute awesome setup, chirps every gear, changes instantly and will change down or up at any rpm if used in manual mode, boost able to be made at the line for dragging. Was sitting behind an Rb26 and has been recently overhauled($4500 spent to date, very fresh, have receipts for latest work). Check Project 11's in ZOOM for info. I've run an 11.8 with 240rwkw. Includes trans cooler, high stall convertor, all lines, wiring, tailshaft and ACU...even dash if you would exchange.

Mike at MV would be happy to talk to you and confirm.

Matt

Edited by BoostdR
400kw Collaborator

400kw

Posted
  • Author
Posted
You wouldn't be interested in a swap for an R33 5speed with lockup...giving 6 ratio's(all GTST's are 4 speed) Auto with High stall? The 5 speed gives power band everywere unlike the 4 speed. Fuel econ is also improved. Has been build by MV Automatics, Kevlar clutches, Modified Valve body and Larger Valves. Its an absolute awesome setup, chirps every gear, changes instantly and will change down or up at any rpm if used in manual mode, boost able to be made at the line for dragging. Was sitting behind an Rb26 and has been recently overhauled($4500 spent to date, very fresh, have receipts for latest work). Check Project 11's in ZOOM for info. I've run an 11.8 with 240rwkw. Includes trans cooler, high stall convertor, all lines, wiring, tailshaft and ACU...even dash if you would exchange.

Mike at MV would be happy to talk to you and confirm.

Matt

sounds the goods mate ,but ive order a c4 .....ill see if i can get out it ..but i dont like my chances ..ill pm you ,when i find out .

cheers

400kw Collaborator

400kw

Posted
  • Author
Posted
I have a 33 auto box sitting around. Has no tail shaft nor shifter tho. Let me know if ur interested

thanx for the offer bud ,but the box needs to be able to handle 500 plus rwkw ..thats why ive oder a c4

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • bcozican
      R32 Gtst - Track Car

      By bcozican · Posted

      Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      Thanks, will do that.  Thankfully they still feel great.
×
×
  • Create New...