Obd 2 On Skylines

[MJTru]

Hi mate's i got the new LM2 wide band and it has a OBD2 log feature.

i was first wondering if the 95 rb25det s2 is OBD 2 i think it is.

and does anyone know of a plug adapter that can convert from jdm to American style OBD 2 plug.

there is a plug by the fuse panel is that it.?????????????????

[Mr Jollwah]

I believe that your skyline uses consult not OBD2.

[MJTru]

so how could i use this to log info using the lm2 wideband unit. does any one have some kind of addapter plug for this.????????????

[paulr33]

its under the right hand side steering column

[MrStabby]

so how could i use this to log info using the lm2 wideband unit. does any one have some kind of addapter plug for this.????????????

Pretty sure you cant just use an adapter plug, as the protocol on the wire will be different.

Also, you cant use wideband for closed loop with the factory computer so you wont be able to read it from there anyway....

[NewKleer]

im pretty sure you can just log the lm2 without obd2? either way theres no way to get the r33 to work with obd2. maybe lm2 has inputs for RPM etc you can wire up?

[MJTru]

thanks guys, the LM2 does have inputs for rpm and so on, but if i could have used the obd2 plug then i would be able to prioritize all my channels that i want to log.

I took an output from the Lm2 for afr and send it to the power FC datalogit 0-5 volt extra input. after a get a new laptop that can run on external battery power as mine is mest up, i will do a log from the fc datalogit and post all results.

That was my main reason for wanting to use the LM2 because it uses a 1g sd card for all logging purpose.

[NewKleer]

you could try hooking it up to the EGT input on the ecu then logging via consult? i dont think its ever been tried before, and not sure if the ecu ever does anything in response to EGT temperature, but when looking at EGT via consult its always 4.98v (possibly gets lower as the egt gets too hot)