Jump to content
SAU Community

E . O . I: 6 And 8 Piston Big Brake Packages


Recommended Posts

Hi all,

Im very keen on getting a big brake upgrade for my R33, the supplier ive been in talks with told me if i can get 5 kits ordered for a group buy the saving on each kit would be very substantial.

So here is the info:

6 and 8 piston calipers

330mm,356mm and a massive 380mm rotors

Rotors can be either grooved or slotted

Kit contains:

Two front 2 piece rotors

Two 6 or 8 piston calipers

Braided brake lines

Dog bones

Pads

You can choose from silver,red and blue.

Slotted version

post-32255-1226663304_thumb.jpg

Grooved version( very similar if not the same as this)

post-32255-1226663595_thumb.jpg

Prices will be between $1699 and $2199 delivered.

Good news is these kits are interchangeable with AP items and come with a 6 month warranty.

If you are interested please feel free to ask questions and ill do my best to answer.

:banana:

Good news is these kits are interchangeable with AP items and come with a 6 month warranty.

does this mean you can use AP pads .?

with the 6 pot kit or 8 pot

so what would it cost me to get a 6pot kit delivered to Adelaide 5013 please im interested as the car goes in this thursday to get worked and ill need bigger brakes after its done.

Good news is these kits are interchangeable with AP items and come with a 6 month warranty.

does this mean you can use AP pads .?

with the 6 pot kit or 8 pot

so what would it cost me to get a 6pot kit delivered to Adelaide 5013 please im interested as the car goes in this thursday to get worked and ill need bigger brakes after its done.

Yes its suited for AP pads.

Your kit will be $1799 Delivered.

Is everything in this kit ADR compliant?

Im not quite sure ill have to ask. Though im sure most aftermarket performance brake products on the market today are not.

Yes its suited for AP pads.

Your kit will be $1799 Delivered.

cool bear with me i just need to decide 356mm or bigger but ill get back to you asap when ive made my mind up

cool bear with me i just need to decide 356mm or bigger but ill get back to you asap when ive made my mind up

You are limited to your wheel size.

330mm for 17 inch, 356mm 18 inch and 380mm 19 inch wheels.

how long does this gb offer go for i wont have the $$$ for a couple off weeks took the car to get rebuilt with a new motor yesterday

but anyway put me down for 6piston 330mm rotor for my r33 4 door ill try to get the cash together abit quicker to you as you need payments first.

cheers

Allan

You are limited to your wheel size.

330mm for 17 inch, 356mm 18 inch and 380mm 19 inch wheels.

Dave, 380mm and 18" works, just need the right offset and spoke design, eg driftek 18" should clear 380mm discs.

Well, i hope so! Ive measured them up against my brakes and they seem fine, mine are AP 6 fronts 380mm, rears are AP 335mm

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Order for the 2025 model R35 GT-R were accepted from 3rd March and 26th August the last order rolled off the production line at the Tochigi plant. Concerning the R35 GT-R replacement, current Nissan CEO Ivan Espinosa said "Nothing has been decided about the GT-R at this time, but we are well aware that everyone is waiting. The GT-R will evolve and reappear in the future. Please be patient until that day comes." Nissan has a lot of issues with management and finances so take Espinosa's words with a big grain of salt. From what discussions I've had and read about here in Japan, not a lot of people are confident about Nissan's future, let alone the next GT-R. 
    • Thanks. We getting some parts along too so he will be solving the speed issue like next week so i will let you know what he came up with.   
    • 21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
×
×
  • Create New...