Jump to content
SAU Community

Recommended Posts

Hey Guys,

As I'm selling my Patrol in the other thread I am also selling the car trailer I purchased to use, we towed with it to g1 and it does not sway at all, such a good trailer and very heavy duty.

In 2003 the floor was redone, and in the last 12 months it has had, new axles, new brakes, and new tyres fitted.

The ramps have been redone and are very heavy duty.

is 16ft in lenght, and unsure of width, but fits my r31 Skyline with a fair bit of offset fairly easily.

Features -

Independent brakes, cable setup

Handbrake

Electronic Winch with hand controller

Manual Winch

Aftermarket tie down points

Ramps are fitted onto flat bed so for ease of use

Toolbox with 12v battery intergrated in

Jerry can and holder

LED taillights

Think they are ford? 15" rims

All great tread

Load sharing suspension (wheels never come off the ground with bumps etc)

Cannot go wrong with this trailer, not cheaply built like a lot of new trailers going in SA, I rang a few places and couldn't even come close to $6500.00 brand new for something like this.

trailer002.jpg

Price - $4500.00

Can include the nissan patrol as a package for $8800.00 Firm. Details in this thread - http://www.skylinesaustralia.com/forums/Sa...Gq-t245192.html

Location - Adelaide Hills, SA.

Contact Ev on 0411748466, or PM me.

Edited by evsr31

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...